User contributions
- 08:53, 20 January 2020 (diff | hist) . . (-2) . . m Mechanical Rigidity (→Rods and Bearings) (current)
- 04:48, 23 June 2018 (diff | hist) . . (+87) . . RAMPS 1.4 (→WARNING - THERMAL-isolation-related DESIGN FLAW IN Power handling capacity of PRODUCTION RAMPS 1.4 boards)
- 06:50, 16 November 2017 (diff | hist) . . (+290) . . RAMPS 1.4/zh cn (current)
- 15:15, 26 October 2017 (diff | hist) . . (+2) . . RD3D/1.0 (→Power Provision for the Arduino / Due) (current)
- 15:13, 26 October 2017 (diff | hist) . . (+162) . . RD3D/1.0 (→Power Provision for the Arduino / Due)
- 04:31, 26 October 2017 (diff | hist) . . (+6,025) . . RD3D/1.0 (→Design features gallery)
- 09:03, 25 October 2017 (diff | hist) . . (+134) . . RD3D/1.0 (→MOSFETs)
- 03:10, 24 October 2017 (diff | hist) . . (0) . . File:A4982-DSB-Reverse.jpg (Lkcl uploaded a new version of "File:A4982-DSB-Reverse.jpg") (current)
- 03:08, 24 October 2017 (diff | hist) . . (0) . . File:A4982-DSB.jpg (Lkcl uploaded a new version of "File:A4982-DSB.jpg") (current)
- 10:09, 23 October 2017 (diff | hist) . . (+220) . . A4982-Dual Stepper Board (→Source, BOM, Schematics) (current)
- 03:19, 23 October 2017 (diff | hist) . . (+898) . . A4982-Dual Stepper Board (→Design considerations)
- 14:44, 22 October 2017 (diff | hist) . . (+3) . . A4982-Dual Stepper Board (→AUX2 Header)
- 14:42, 22 October 2017 (diff | hist) . . (+578) . . A4982-Dual Stepper Board (→Design considerations)
- 07:29, 22 October 2017 (diff | hist) . . (+2,250) . . A4982-Dual Stepper Board (→Design considerations)
- 06:56, 22 October 2017 (diff | hist) . . (0) . . m A4982-Dual Stepper Board
- 06:55, 22 October 2017 (diff | hist) . . (0) . . N File:A4982-DSB-Reverse.jpg
- 06:55, 22 October 2017 (diff | hist) . . (0) . . N File:A4982-DSB.jpg
- 06:44, 22 October 2017 (diff | hist) . . (+3,404) . . N A4982-Dual Stepper Board (Created page with "{{Development <!--Header--> |name = A4982-Dual_Stepper_Board |status = Experimental <!--Image--> |image = A4982-DSB.jpg <!--General--> |description = A4982 Dual Stepper Board ...")
- 12:46, 20 October 2017 (diff | hist) . . (+54) . . TMC2660-Dual Stepper Board (→Design considerations) (current)
- 02:41, 19 October 2017 (diff | hist) . . (0) . . m FilamentWidthSensorBoard (→TSL1401CL Filament Width Board) (current)
- 02:40, 19 October 2017 (diff | hist) . . (-5) . . m FilamentWidthSensorBoard
- 02:40, 19 October 2017 (diff | hist) . . (0) . . N File:FilwidthSensorBoardPCB.jpg (current)
- 02:39, 19 October 2017 (diff | hist) . . (+1) . . m FilamentWidthSensorBoard
- 02:38, 19 October 2017 (diff | hist) . . (+1,166) . . N FilamentWidthSensorBoard (Created page with "{{Development <!--Header--> |name = FilamentWidthSensorBoard |status = Experimental <!--Image--> |image = FilwidthSensorBoardPCB.jpg <!--General--> |description = Filament Wid...")
- 22:47, 15 October 2017 (diff | hist) . . (+256) . . TMC2660-Dual Stepper Board (Undo revision 180590 by Lkcl (talk))
- 22:46, 15 October 2017 (diff | hist) . . (-256) . . TMC2660-Dual Stepper Board
- 09:48, 15 October 2017 (diff | hist) . . (+256) . . TMC2660-Dual Stepper Board (→AUX2 Header)
- 09:24, 15 October 2017 (diff | hist) . . (-46) . . RD3D/1.0 (→MOSFETs)
- 09:16, 15 October 2017 (diff | hist) . . (-2) . . RD3D/1.0
- 05:42, 15 October 2017 (diff | hist) . . (+37) . . TMC2660-Dual Stepper Board (→Prototype)
- 05:41, 15 October 2017 (diff | hist) . . (0) . . TMC2660-Dual Stepper Board (→Prototype)
- 05:40, 15 October 2017 (diff | hist) . . (+395) . . TMC2660-Dual Stepper Board (→Dual TMC2660 Expansion Board)
- 05:36, 15 October 2017 (diff | hist) . . (0) . . N File:TMC2660 DSB STEPDIR HDR.jpg (current)
- 05:36, 15 October 2017 (diff | hist) . . (+584) . . TMC2660-Dual Stepper Board (→AUX2 Header)
- 05:25, 15 October 2017 (diff | hist) . . (0) . . File:TMC2660 DSB AUX2.jpg (Lkcl uploaded a new version of "File:TMC2660 DSB AUX2.jpg") (current)
- 05:25, 15 October 2017 (diff | hist) . . (+294) . . TMC2660-Dual Stepper Board (→AUX2 Header)
- 05:23, 15 October 2017 (diff | hist) . . (-195) . . TMC2660-Dual Stepper Board (→AUX2 Header)
- 05:08, 15 October 2017 (diff | hist) . . (+636) . . TMC2660-Dual Stepper Board (→Design considerations)
- 05:07, 15 October 2017 (diff | hist) . . (0) . . N File:TMC2660 STEP DIR in the middle.jpg (current)
- 02:20, 15 October 2017 (diff | hist) . . (+1,080) . . TMC2660-Dual Stepper Board (→Prototype)
- 02:13, 15 October 2017 (diff | hist) . . (0) . . N File:RD3D STEP DIR tracks.jpg (current)
- 21:42, 14 October 2017 (diff | hist) . . (+78) . . RD3D/1.0 (→Summary)
- 21:40, 14 October 2017 (diff | hist) . . (+71) . . RD3D/1.0 (→Design features gallery)
- 21:18, 14 October 2017 (diff | hist) . . (+508) . . RD3D/1.0
- 21:17, 14 October 2017 (diff | hist) . . (+1) . . m RAMPS LCD (spelling correction) (current)
- 11:46, 14 October 2017 (diff | hist) . . (+56) . . TMC2660-Dual Stepper Board
- 11:44, 14 October 2017 (diff | hist) . . (+75) . . TMC2660-Dual Stepper Board (→Dual TMC2660 Expansion Board)
- 11:42, 14 October 2017 (diff | hist) . . (+1) . . m TMC2660-Dual Stepper Board
- 11:42, 14 October 2017 (diff | hist) . . (+34) . . TMC2660-Dual Stepper Board
- 11:40, 14 October 2017 (diff | hist) . . (+31) . . TMC2660-Dual Stepper Board
- 11:37, 14 October 2017 (diff | hist) . . (+168) . . TMC2660-Dual Stepper Board (→Dual TMC2660 Expansion Board)
- 11:35, 14 October 2017 (diff | hist) . . (+41) . . TMC2660-Dual Stepper Board
- 11:33, 14 October 2017 (diff | hist) . . (-1) . . TMC2660-Dual Stepper Board (→AUX2 Header)
- 11:32, 14 October 2017 (diff | hist) . . (0) . . N File:TMC2660 DSB AUX2.jpg
- 11:31, 14 October 2017 (diff | hist) . . (+1,386) . . TMC2660-Dual Stepper Board (→Prototype)
- 11:23, 14 October 2017 (diff | hist) . . (+184) . . TMC2660-Dual Stepper Board (→Prototype)
- 11:20, 14 October 2017 (diff | hist) . . (0) . . N File:TMC2660-DSB-reverse.jpg (current)
- 11:19, 14 October 2017 (diff | hist) . . (+30) . . TMC2660-Dual Stepper Board (→Dual TMC2660 Expansion Board)
- 11:18, 14 October 2017 (diff | hist) . . (+2) . . TMC2660-Dual Stepper Board
- 11:18, 14 October 2017 (diff | hist) . . (0) . . N File:TMC2660-DSB.jpg (current)
- 11:16, 14 October 2017 (diff | hist) . . (+764) . . N TMC2660-Dual Stepper Board (create TMC2660 dual stepper board page, GPLv3+ licensed)
- 02:39, 14 October 2017 (diff | hist) . . (+170) . . RAMPS 1.4 (→WARNING - THERMAL-isolation-related DESIGN FLAW IN Power handling capacity of PRODUCTION RAMPS 1.4 boards)
- 00:30, 14 October 2017 (diff | hist) . . (0) . . N File:RAMPS 1 4 THERMAL DESIGN FLAW.jpg (current)
- 00:30, 14 October 2017 (diff | hist) . . (+1,452) . . RAMPS 1.4 (add warning and evidence of flawed thermal design power handling capacity in RAMPS 1.4)
- 12:19, 13 October 2017 (diff | hist) . . (-4) . . m RD3D/1.0 (→MOSFETs)
- 12:18, 13 October 2017 (diff | hist) . . (0) . . RD3D/1.0 (→Design features gallery)
- 08:48, 13 October 2017 (diff | hist) . . (+888) . . RD3D/1.0 (→MOSFETs)
- 08:47, 13 October 2017 (diff | hist) . . (-873) . . RD3D/1.0 (→Connectors)
- 08:46, 13 October 2017 (diff | hist) . . (0) . . RD3D/1.0 (→MOSFETs)
- 08:45, 13 October 2017 (diff | hist) . . (+5) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 08:43, 13 October 2017 (diff | hist) . . (+3) . . RD3D/1.0 (→Connectors)
- 08:40, 13 October 2017 (diff | hist) . . (0) . . N File:RD3D Pins.jpg (current)
- 08:40, 13 October 2017 (diff | hist) . . (+95) . . RD3D/1.0 (→Connectors)
- 08:39, 13 October 2017 (diff | hist) . . (+19) . . RD3D/1.0 (→MOSFET, Extruder and Fan Power)
- 08:38, 13 October 2017 (diff | hist) . . (+16) . . RD3D/1.0 (→Main Board Power =)
- 08:38, 13 October 2017 (diff | hist) . . (+19) . . RD3D/1.0 (→Arduino/Due Power and Reset)
- 08:37, 13 October 2017 (diff | hist) . . (+19) . . RD3D/1.0 (→ICSP)
- 08:37, 13 October 2017 (diff | hist) . . (0) . . N File:RD3D DNPower.jpg (current)
- 08:36, 13 October 2017 (diff | hist) . . (0) . . N File:RD3D DCIN.jpg (current)
- 08:36, 13 October 2017 (diff | hist) . . (+850) . . RD3D/1.0 (→Power and Reset)
- 23:50, 10 October 2017 (diff | hist) . . (0) . . m BAM&DICE (current)
- 23:50, 10 October 2017 (diff | hist) . . (0) . . m BAM&DICE-DUE (current)
- 23:24, 10 October 2017 (diff | hist) . . (+24) . . BAM&DICE
- 23:24, 10 October 2017 (diff | hist) . . (+22) . . BAM&DICE-DUE
- 22:28, 10 October 2017 (diff | hist) . . (+24) . . SAV MKI (current)
- 21:50, 9 October 2017 (diff | hist) . . (+25) . . RD3D/1.0 (→Connectors)
- 21:50, 9 October 2017 (diff | hist) . . (+199) . . RD3D/1.0 (→ICSP)
- 21:42, 9 October 2017 (diff | hist) . . (0) . . N File:RD3D ICSP.jpg (current)
- 21:42, 9 October 2017 (diff | hist) . . (+570) . . RD3D/1.0 (→Connectors)
- 21:30, 9 October 2017 (diff | hist) . . (+247) . . Melzi (→Melzi 1.0/2.0 eBay Hybrid)
- 21:27, 9 October 2017 (diff | hist) . . (+304) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 21:19, 9 October 2017 (diff | hist) . . (+320) . . RD3D/1.0 (→Configuring for A4988-compatible (without SPI))
- 21:19, 9 October 2017 (diff | hist) . . (0) . . File:RD3D TMC2130.jpg (Lkcl uploaded a new version of "File:RD3D TMC2130.jpg") (current)
- 21:11, 9 October 2017 (diff | hist) . . (+137) . . RD3D/1.0 (→Configuring for A4988-compatible (without SPI))
- 21:09, 9 October 2017 (diff | hist) . . (+41) . . RD3D/1.0 (→Configuring for SPI)
- 21:07, 9 October 2017 (diff | hist) . . (0) . . File:RD3D TMC2130.jpg (Lkcl uploaded a new version of "File:RD3D TMC2130.jpg")
- 04:25, 9 October 2017 (diff | hist) . . (+124) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 04:16, 9 October 2017 (diff | hist) . . (+24) . . Printrboard
- 02:45, 9 October 2017 (diff | hist) . . (+38) . . Comparison of Electronics
- 02:42, 9 October 2017 (diff | hist) . . (+48) . . m Comparison of Electronics
- 02:40, 9 October 2017 (diff | hist) . . (+274) . . Comparison of Electronics (got fed up with bugs in wikimedia, use nbsp instead of having width on columns completely ignored.)
- 02:31, 9 October 2017 (diff | hist) . . (-2) . . Comparison of Electronics
- 02:25, 9 October 2017 (diff | hist) . . (+34) . . Comparison of Electronics
- 02:04, 9 October 2017 (diff | hist) . . (+764) . . Comparison of Electronics (add RD3D)
- 01:48, 9 October 2017 (diff | hist) . . (+22) . . Ultimaker's v1.5.7 PCB
- 01:46, 9 October 2017 (diff | hist) . . (+29) . . Category:32-bit board
- 01:45, 9 October 2017 (diff | hist) . . (+23) . . Rambo
- 01:45, 9 October 2017 (diff | hist) . . (0) . . m Generation 7 Electronics (current)
- 01:41, 9 October 2017 (diff | hist) . . (+127) . . Category:32-bit board
- 01:40, 9 October 2017 (diff | hist) . . (+21) . . Generation 7 Electronics
- 01:39, 9 October 2017 (diff | hist) . . (+21) . . Replicape
- 01:35, 9 October 2017 (diff | hist) . . (+138) . . Category:32-bit board
- 01:35, 9 October 2017 (diff | hist) . . (+17) . . m Category:8/16-bit board
- 01:34, 9 October 2017 (diff | hist) . . (+243) . . Category:8/16-bit board
- 01:32, 9 October 2017 (diff | hist) . . (+22) . . Megatronics (current)
- 01:30, 9 October 2017 (diff | hist) . . (+29) . . Category:32-bit board
- 01:30, 9 October 2017 (diff | hist) . . (+21) . . R2C2 RepRap Electronics (current)
- 01:29, 9 October 2017 (diff | hist) . . (+21) . . Smoothieboard (current)
- 01:28, 9 October 2017 (diff | hist) . . (+82) . . List of electronics (→8 bits community based, tested and supported electronics)
- 01:28, 9 October 2017 (diff | hist) . . (+19) . . List of electronics (→32 bits Community based, tested and supported electronics)
- 01:22, 9 October 2017 (diff | hist) . . (+58) . . List of electronics (→32 bits Community based, tested and supported electronics)
- 01:19, 9 October 2017 (diff | hist) . . (+24) . . Melzi (add 8/16-bit category)
- 01:17, 9 October 2017 (diff | hist) . . (+26) . . Xpresso Smoothie (add categories 32-bit, add word "at") (current)
- 01:16, 9 October 2017 (diff | hist) . . (+22) . . DuetWifi (add categories 32-bit) (current)
- 01:15, 9 October 2017 (diff | hist) . . (+22) . . Duet (add categories 32-bit)
- 01:15, 9 October 2017 (diff | hist) . . (+22) . . RAMPS-FD
- 01:14, 9 October 2017 (diff | hist) . . (+24) . . RAMPS 1.4 (add 8/16-bit category)
- 01:13, 9 October 2017 (diff | hist) . . (+226) . . N Category:32-bit board (Created page with "This page shows Reprap Controller Boards (3D printing, laser, CNC etc.) that use a 32-bit Micro-Controller. 32-bit MCUs are much faster and generally have better capabilities...")
- 01:11, 9 October 2017 (diff | hist) . . (+129) . . N Category:8/16-bit board (Created page with "This page shows Reprap Controller Boards (3D printing, laser, CNC etc.) that use (or can use) an 8-bit or 16-bit Micro-Controller")
- 01:09, 9 October 2017 (diff | hist) . . (+44) . . RD3D/1.0 (add categories 32-bit and 8/16-bit)
- 23:33, 8 October 2017 (diff | hist) . . (0) . . m RD3D/1.0 (→MOSFETs)
- 23:32, 8 October 2017 (diff | hist) . . (+29) . . m RD3D/1.0 (→MOSFETs)
- 23:29, 8 October 2017 (diff | hist) . . (+109) . . RD3D/1.0 (→Power and Reset)
- 23:27, 8 October 2017 (diff | hist) . . (+655) . . RD3D/1.0 (→Connectors)
- 23:21, 8 October 2017 (diff | hist) . . (+479) . . RD3D/1.0 (add zprobe section back in (lost somehow))
- 20:41, 8 October 2017 (diff | hist) . . (+241) . . RD3D/1.0 (→Stepper Boards)
- 20:39, 8 October 2017 (diff | hist) . . (+247) . . RD3D/1.0 (→Stepper Boards)
- 20:37, 8 October 2017 (diff | hist) . . (+85) . . RD3D/1.0 (→Stepper Boards)
- 20:35, 8 October 2017 (diff | hist) . . (-23) . . RD3D/1.0 (→Thermistor Circuit)
- 20:35, 8 October 2017 (diff | hist) . . (+69) . . RD3D/1.0 (→Thermistors)
- 20:33, 8 October 2017 (diff | hist) . . (+111) . . RD3D/1.0 (→AUX2)
- 20:32, 8 October 2017 (diff | hist) . . (+94) . . RD3D/1.0 (→AUX2)
- 04:48, 7 October 2017 (diff | hist) . . (+866) . . N User:Lkcl (Created page with "= Luke Kenneth Casson Leighton = Libre Software and Hardware Engineer and advocate, trained as a Software Engineer at Imperial College, loves doing electronics, 3D printing, ...") (current)
- 04:37, 7 October 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 prototype.jpg (current)
- 04:36, 7 October 2017 (diff | hist) . . (+4) . . RD3D/1.0
- 23:49, 6 October 2017 (diff | hist) . . (0) . . RD3D/1.0 (→Thermistors)
- 23:49, 6 October 2017 (diff | hist) . . (+19) . . RD3D/1.0 (→Thermistor Circuit)
- 23:48, 6 October 2017 (diff | hist) . . (+111) . . RD3D/1.0 (→Thermistors)
- 23:46, 6 October 2017 (diff | hist) . . (0) . . N File:RD3D Thermistor Circuit.jpg (current)
- 23:46, 6 October 2017 (diff | hist) . . (0) . . N File:RD3D Thermistors.jpg (current)
- 23:45, 6 October 2017 (diff | hist) . . (+16) . . RD3D/1.0 (→ZProbe / Filament Detect)
- 23:28, 6 October 2017 (diff | hist) . . (+27) . . m RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 23:27, 6 October 2017 (diff | hist) . . (+241) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 23:23, 6 October 2017 (diff | hist) . . (+136) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 23:20, 6 October 2017 (diff | hist) . . (+51) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 23:15, 6 October 2017 (diff | hist) . . (+466) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 23:07, 6 October 2017 (diff | hist) . . (+35) . . RD3D/1.0 (→ZProbe / Filament Detect)
- 23:03, 6 October 2017 (diff | hist) . . (0) . . N File:RD3D ZProbe.jpg (current)
- 23:02, 6 October 2017 (diff | hist) . . (+444) . . RD3D/1.0 (→AUX2)
- 22:56, 6 October 2017 (diff | hist) . . (+66) . . RD3D/1.0 (→AUX2)
- 22:53, 6 October 2017 (diff | hist) . . (+56) . . m RD3D/1.0 (→MOSFETs)
- 12:05, 27 September 2017 (diff | hist) . . (+1,635) . . RD3D/1.0 (→Stepper Boards)
- 11:47, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D TMC2130.jpg
- 11:47, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D A4988.jpg (current)
- 11:47, 27 September 2017 (diff | hist) . . (+540) . . RD3D/1.0 (→Connectors)
- 06:32, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D POW Reset.jpg (current)
- 06:32, 27 September 2017 (diff | hist) . . (+775) . . RD3D/1.0 (→AUX3)
- 05:03, 27 September 2017 (diff | hist) . . (+2,666) . . RD3D/1.0 (→Connectors)
- 04:35, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D SPI.jpg (current)
- 04:35, 27 September 2017 (diff | hist) . . (+878) . . RD3D/1.0 (→Endstops)
- 04:24, 27 September 2017 (diff | hist) . . (+15) . . RD3D/1.0 (→I2C)
- 04:24, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D UART.jpg (current)
- 04:23, 27 September 2017 (diff | hist) . . (+301) . . RD3D/1.0 (→Endstops)
- 04:19, 27 September 2017 (diff | hist) . . (0) . . N File:RD3D AUX4.jpg (current)
- 04:18, 27 September 2017 (diff | hist) . . (+669) . . RD3D/1.0 (→AUX2)
- 04:13, 27 September 2017 (diff | hist) . . (+363) . . RD3D/1.0 (→AUX2)
- 15:01, 23 September 2017 (diff | hist) . . (+40) . . RD3D/1.0 (→Note regarding GPLv3 License Compliance)
- 04:01, 23 September 2017 (diff | hist) . . (+464) . . RD3D/1.0
- 16:59, 22 September 2017 (diff | hist) . . (+52) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 16:55, 22 September 2017 (diff | hist) . . (+303) . . RD3D/1.0 (→AUX2)
- 16:50, 22 September 2017 (diff | hist) . . (0) . . N File:RD3D AUX2.jpg (current)
- 16:50, 22 September 2017 (diff | hist) . . (+228) . . RD3D/1.0 (→I2C)
- 16:49, 22 September 2017 (diff | hist) . . (+7) . . RD3D/1.0 (→I2C)
- 16:45, 22 September 2017 (diff | hist) . . (0) . . N File:RD3D I2C.jpg (current)
- 16:45, 22 September 2017 (diff | hist) . . (+255) . . RD3D/1.0 (→Endstops)
- 16:42, 22 September 2017 (diff | hist) . . (+153) . . RD3D/1.0 (→Endstops)
- 16:39, 22 September 2017 (diff | hist) . . (0) . . N File:RD3D Endstops.jpg (current)
- 16:39, 22 September 2017 (diff | hist) . . (+96) . . RD3D/1.0 (→GPLv3 PCB Board Source code)
- 16:37, 22 September 2017 (diff | hist) . . (+108) . . RD3D/1.0 (→BOM, PDFs)
- 12:27, 22 September 2017 (diff | hist) . . (+54) . . RD3D/1.0 (→Design features gallery)
- 10:19, 22 September 2017 (diff | hist) . . (0) . . File:RD3D 1.0 VMOT.JPG (Lkcl uploaded a new version of "File:RD3D 1.0 VMOT.JPG") (current)
- 10:17, 22 September 2017 (diff | hist) . . (0) . . File:RD3D 1.0 eagle.jpg (Lkcl uploaded a new version of "File:RD3D 1.0 eagle.jpg") (current)
- 10:11, 22 September 2017 (diff | hist) . . (+200) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 10:07, 22 September 2017 (diff | hist) . . (0) . . File:RD3D 1.0 LDO.JPG (Lkcl uploaded a new version of "File:RD3D 1.0 LDO.JPG") (current)
- 10:07, 22 September 2017 (diff | hist) . . (0) . . RD3D/1.0 (→Design features gallery)
- 10:05, 22 September 2017 (diff | hist) . . (+30) . . RD3D/1.0 (→Design features gallery)
- 10:05, 22 September 2017 (diff | hist) . . (0) . . File:RD3D 1.0 SDCARD.JPG (Lkcl uploaded a new version of "File:RD3D 1.0 SDCARD.JPG") (current)
- 07:34, 22 September 2017 (diff | hist) . . (+311) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 09:13, 21 September 2017 (diff | hist) . . (-2) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 02:03, 21 September 2017 (diff | hist) . . (+274) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 02:00, 21 September 2017 (diff | hist) . . (+535) . . RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 04:17, 20 September 2017 (diff | hist) . . (0) . . m RD3D/1.0 (→Why is the RD3D Board being done? Why not use an existing board?)
- 19:51, 17 September 2017 (diff | hist) . . (+82) . . RD3D/1.0 (→RD3D v1.0 - Reprap Due for 3D Printing)
- 19:48, 17 September 2017 (diff | hist) . . (-1) . . RD3D/1.0
- 19:48, 17 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 eagle.jpg
- 23:38, 15 September 2017 (diff | hist) . . (0) . . RD3D/1.0
- 23:17, 15 September 2017 (diff | hist) . . (-1) . . m RD3D/1.0 (→RD3D v1.0 - Reprap Duet for 3D Printing)
- 23:16, 15 September 2017 (diff | hist) . . (+3,379) . . RD3D/1.0 (→RD3D v1.0 - Reprap Duet for 3D Printing)
- 22:12, 15 September 2017 (diff | hist) . . (+201) . . RD3D/1.0 (→GPLv3 PCB Board Source code)
- 21:48, 15 September 2017 (diff | hist) . . (+57) . . RD3D/1.0 (→PCB Design features)
- 21:46, 15 September 2017 (diff | hist) . . (+132) . . RD3D/1.0 (→PCB Design features)
- 21:44, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 LDO.JPG
- 21:42, 15 September 2017 (diff | hist) . . (+71) . . RD3D/1.0 (→PCB Design features)
- 21:40, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 MOSFETBUFFER.JPG (current)
- 21:38, 15 September 2017 (diff | hist) . . (+92) . . RD3D/1.0 (→PCB Design features)
- 21:37, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 6STEPPERS.JPG (current)
- 21:34, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 SDCARD.JPG
- 21:33, 15 September 2017 (diff | hist) . . (+93) . . RD3D/1.0 (→PCB Design features)
- 21:30, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 VMOT.JPG
- 21:30, 15 September 2017 (diff | hist) . . (+62) . . RD3D/1.0 (→PCB Design features)
- 21:27, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 LEDs.JPG (current)
- 21:22, 15 September 2017 (diff | hist) . . (0) . . N File:Untitled1.jpg (current)
- 21:21, 15 September 2017 (diff | hist) . . (+168) . . RD3D/1.0 (→GPLv3 PCB Board Source code)
- 12:00, 15 September 2017 (diff | hist) . . (-23) . . m RD3D/1.0 (→RD3D v1.0 - Reprap Duet for 3D Printing)
- 11:39, 15 September 2017 (diff | hist) . . (0) . . N File:RD3D 1.0 render.jpg (current)
- 11:38, 15 September 2017 (diff | hist) . . (+19) . . RD3D/1.0 (add rd3d image link)
- 11:01, 15 September 2017 (diff | hist) . . (+72) . . RD3D/1.0
- 10:17, 15 September 2017 (diff | hist) . . (+140) . . RD3D/1.0 (→RD3D v1.0 - Reprap Duet for 3D Printing)
- 02:28, 15 September 2017 (diff | hist) . . (+628) . . RD3D/1.0
- 10:40, 14 September 2017 (diff | hist) . . (+1,251) . . RD3D/1.0
- 10:07, 14 September 2017 (diff | hist) . . (+43) . . N RD3D/1.0 (placeholder page)
- 16:12, 23 August 2017 (diff | hist) . . (0) . . Riki200 (→Bill of Materials) (current)
- 15:54, 23 August 2017 (diff | hist) . . (-230) . . Riki200 (→Tools)
- 15:53, 23 August 2017 (diff | hist) . . (+6) . . Riki200 (→Concept 3)
- 15:48, 23 August 2017 (diff | hist) . . (0) . . N File:Riki200 side render cad.jpg (current)
- 15:46, 23 August 2017 (diff | hist) . . (+91) . . Riki200 (→Concept 3)
- 15:43, 23 August 2017 (diff | hist) . . (+72) . . Riki200 (→Features)
- 15:40, 23 August 2017 (diff | hist) . . (0) . . N File:Riki200 concept3.jpg (current)
- 15:40, 23 August 2017 (diff | hist) . . (+20) . . Riki200
- 13:31, 15 August 2017 (diff | hist) . . (+78) . . Riki200 (→Development)
- 10:41, 14 August 2017 (diff | hist) . . (+119) . . Mechanical Rigidity (→Mechanical Rigidity)
- 07:19, 14 August 2017 (diff | hist) . . (+357) . . Riki200 (→Concept 3)
- 07:17, 14 August 2017 (diff | hist) . . (0) . . N File:Riki200 ultimaker with pulleys.jpg (current)
- 07:16, 14 August 2017 (diff | hist) . . (0) . . N File:Riki200 etch a sketch full.jpg (current)
- 07:16, 14 August 2017 (diff | hist) . . (+236) . . Riki200 (→Concept 2)
- 06:36, 14 August 2017 (diff | hist) . . (0) . . m Riki200 (→Concept 2)
- 06:36, 14 August 2017 (diff | hist) . . (0) . . N File:Riki200 etch a sketch.jpg (current)
- 06:34, 14 August 2017 (diff | hist) . . (+90) . . Riki200
- 06:33, 30 July 2017 (diff | hist) . . (+359) . . Riki200 (→Design sketches)
- 11:03, 29 May 2017 (diff | hist) . . (0) . . File:Riki200 design sketch.png (Lkcl uploaded a new version of "File:Riki200 design sketch.png") (current)
- 11:01, 29 May 2017 (diff | hist) . . (0) . . File:Riki200 design sketch.png (Lkcl uploaded a new version of "File:Riki200 design sketch.png")
- 10:44, 29 May 2017 (diff | hist) . . (+1,601) . . Riki200 (→Design sketches)
- 10:32, 29 May 2017 (diff | hist) . . (0) . . N File:Riki200 design sketch.png
- 10:32, 29 May 2017 (diff | hist) . . (+86) . . Riki200 (→Hardware Specifications)
- 09:52, 28 May 2017 (diff | hist) . . (+90) . . Mechanical Rigidity (→Mechanical Rigidity)
- 21:47, 24 May 2017 (diff | hist) . . (+2,683) . . Mechanical Rigidity (→Vertical vs Horizontal Carriage Mounting)
- 18:23, 22 May 2017 (diff | hist) . . (+467) . . Mechanical Rigidity (→Vertical vs Horizontal Carriage Mounting)
- 13:46, 17 May 2017 (diff | hist) . . (+151) . . Mechanical Rigidity (→Frame Video demonstrations)
- 13:45, 17 May 2017 (diff | hist) . . (+434) . . Mechanical Rigidity (→Frame Video demonstrations)
- 13:39, 17 May 2017 (diff | hist) . . (+106) . . Mechanical Rigidity/Fisher (→Fisher Delta) (current)
- 13:38, 17 May 2017 (diff | hist) . . (+176) . . Mechanical Rigidity/Video demo Fisher improvement (→Video demonstration of improvement to the Fisher Delta)
- 13:37, 17 May 2017 (diff | hist) . . (+847) . . N Mechanical Rigidity/Video demo Fisher improvement (Created page with "= Video demonstration of improvement to the Fisher Delta = An earlier video showed a potential weakness in the Fisher Delta design: potential bowing of the three panels which...")
- 13:31, 17 May 2017 (diff | hist) . . (+191) . . Mechanical Rigidity (→Frame Video demonstrations)
- 13:24, 17 May 2017 (diff | hist) . . (+497) . . N Mechanical Rigidity/Video demo toblerone design (Created page with "= Video demonstration of Toblerone-style frame = This video covers both the Mendel (toblerone on its side) as well as the Kossel (toblerone on its end). Both are basically h...")
- 13:05, 17 May 2017 (diff | hist) . . (+243) . . Mechanical Rigidity (→Frame Video demonstrations)
- 12:40, 17 May 2017 (diff | hist) . . (0) . . N File:FisherPanelImprovement.png (current)
- 12:40, 17 May 2017 (diff | hist) . . (+393) . . Mechanical Rigidity/Fisher (→Fisher Delta)
- 12:19, 17 May 2017 (diff | hist) . . (+501) . . Mechanical Rigidity/Fisher
- 11:41, 17 May 2017 (diff | hist) . . (+216) . . Mechanical Rigidity/Video demo cube design (→Cube design)
- 11:39, 17 May 2017 (diff | hist) . . (-393) . . Mechanical Rigidity (→Frame Video demonstrations)
- 11:38, 17 May 2017 (diff | hist) . . (+657) . . N Mechanical Rigidity/Video demo cube design (Created page with "= Cube design = Three different techniques are demonstrated to create a rigid frame: bracing, full panel and "picture-frame" open panel, when using extrusion (or other materi...")
- 11:35, 17 May 2017 (diff | hist) . . (+783) . . Mechanical Rigidity (→Frame Examples)
- 07:30, 17 May 2017 (diff | hist) . . (+92) . . Riki200 (→Features)
- 20:00, 16 May 2017 (diff | hist) . . (+311) . . Mechanical Rigidity (→Carriage Arrangement Examples)
- 19:57, 16 May 2017 (diff | hist) . . (+306) . . Mechanical Rigidity/Lulzbot Taz4 V slot Openbuilds rework (→Lulzbot TAZ 4 Vertical Upgrade using Openbuilds V-Slot and 8020 extrusion) (current)
- 19:06, 16 May 2017 (diff | hist) . . (+659) . . Mechanical Rigidity/Lulzbot Taz4 V slot Openbuilds rework (→Lulzbot TAZ 4 Vertical Upgrade using Openbuilds V-Slot and 8020 extrusion)
- 19:02, 16 May 2017 (diff | hist) . . (0) . . N File:Lulzbot vslot taz4 carriage.png (current)
- 19:00, 16 May 2017 (diff | hist) . . (+145) . . N Mechanical Rigidity/Lulzbot Taz4 V slot Openbuilds rework (Created page with "= Lulzbot TAZ 4 Vertical Upgrade using Openbuilds V-Slot and 8020 extrusion = V-slot on 8020 extrusion")
- 18:58, 16 May 2017 (diff | hist) . . (+64) . . Mechanical Rigidity (→Carriage Arrangement Examples)
- 18:48, 16 May 2017 (diff | hist) . . (+1,105) . . Mechanical Rigidity/Horizontal China Clone Carriage rework (→Rework of a truly dreadful China clone from vertical into horizontal carriage arrangement) (current)
- 18:37, 16 May 2017 (diff | hist) . . (0) . . N File:China clone horizontal carriage 2.png (current)
- 18:36, 16 May 2017 (diff | hist) . . (0) . . N File:China clone horizontal carriage 1.png (current)
- 18:35, 16 May 2017 (diff | hist) . . (+293) . . N Mechanical Rigidity/Horizontal China Clone Carriage rework (Created page with "= Rework of a truly dreadful China clone from vertical into horizontal carriage arrangement = File:China_clone_horizontal_carriage_1.png| Replacement horizontal carriage on...")
- 18:33, 16 May 2017 (diff | hist) . . (+110) . . Mechanical Rigidity (→Vertical vs Horizontal Carriage Mounting)
- 15:33, 16 May 2017 (diff | hist) . . (+1) . . m Mechanical Rigidity (→Vertical vs Horizontal Carriage Mounting)
- 13:40, 16 May 2017 (diff | hist) . . (+2,744) . . Mechanical Rigidity (→Print Bed Mounting: 3 or 4 points)
- 13:12, 16 May 2017 (diff | hist) . . (-1) . . Vertical X Axis Standard ("and editor" should be "an editor")
- 13:11, 16 May 2017 (diff | hist) . . (+47) . . m Mechanical Rigidity
- 10:52, 16 May 2017 (diff | hist) . . (+575) . . Mechanical Rigidity/Fusebox classic flawed cantilever printbed (→Fusebox: inadequate 8mm rods, single lead screw, cantilevered bed with insufficient support) (current)
- 10:46, 16 May 2017 (diff | hist) . . (+67) . . Mechanical Rigidity/Fusebox classic flawed cantilever printbed (→Fusebox: inadequate 8mm rods, single lead screw, cantilevered bed with insufficient support)
- 10:44, 16 May 2017 (diff | hist) . . (+69) . . Mechanical Rigidity (→Printbeds)
- 07:41, 16 May 2017 (diff | hist) . . (+47) . . m Mechanical Rigidity (→Printbeds)
- 07:39, 16 May 2017 (diff | hist) . . (+161) . . Mechanical Rigidity (→Printbeds)
- 07:33, 16 May 2017 (diff | hist) . . (-2,484) . . Mechanical Rigidity (→Fusebox: inadequate 8mm rods, single lead screw, cantilevered bed with insufficient support)
- 07:32, 16 May 2017 (diff | hist) . . (+2,669) . . N Mechanical Rigidity/Fusebox classic flawed cantilever printbed (Created page with "= Fusebox: inadequate 8mm rods, single lead screw, cantilevered bed with insufficient support = The Fusebox is a low-cost design that highlights a huge number of flaws with t...")
- 07:30, 16 May 2017 (diff | hist) . . (-1,018) . . Mechanical Rigidity (→Laser-cut acrylic / wood, single lead screw, dual rods cantilevered design)
- 07:30, 16 May 2017 (diff | hist) . . (+1,172) . . N Mechanical Rigidity/Boxframe Cantilever Printbed (Created page with "= Laser-cut acrylic / wood, single lead screw, dual rods cantilevered design = There is an innovative upgrade to the Cupcake CNC which is based around laser-cutting of thick ...") (current)
- 07:29, 16 May 2017 (diff | hist) . . (-1) . . m Mechanical Rigidity (→Triple lead screws, dual rails)
- 07:28, 16 May 2017 (diff | hist) . . (-2,240) . . Mechanical Rigidity (→Printbed Examples)
- 07:27, 16 May 2017 (diff | hist) . . (+2,333) . . N Mechanical Rigidity/Triple Lead Dual Support (Created page with "= Triple lead screws, dual rails = This type of design is discussed on the reprap forum here: http://forums.reprap.org/read.php?397,726304,766930 and the design files may be ...") (current)
- 18:21, 15 May 2017 (diff | hist) . . (+42) . . Mechanical Rigidity/Mendel (→Mendel (Early Prusa) inadequate design characteristics) (current)
- 18:19, 15 May 2017 (diff | hist) . . (-2) . . m Mechanical Rigidity/MendelFlex (current)
- 18:17, 15 May 2017 (diff | hist) . . (+10) . . Mechanical Rigidity (reorganise page)
- 18:14, 15 May 2017 (diff | hist) . . (+127) . . Mechanical Rigidity (→Frame Examples)
- 18:11, 15 May 2017 (diff | hist) . . (+540) . . Mechanical Rigidity (→Frame Examples)
- 18:06, 15 May 2017 (diff | hist) . . (+583) . . N Mechanical Rigidity/Fisher (Created page with " = Fisher Delta = The Fisher is an experimental Delta printer that has a properly rigid frame. thumb | Fisher experimental Delta Like the Ultim...")
- 18:01, 15 May 2017 (diff | hist) . . (+88) . . Mechanical Rigidity/Original Kossel (current)
- 14:58, 15 May 2017 (diff | hist) . . (-17,354) . . Mechanical Rigidity (split frame examples into their own sub-pages)
- 14:57, 15 May 2017 (diff | hist) . . (+1,510) . . N Mechanical Rigidity/MendelFlex (Created page with "== MendelFlex == The MendelFlex is a modified version of the original Mendel concept, replacing rods with 2020 extrusion and adding a "box" at the base. File:MendelFlex_02...")
- 14:56, 15 May 2017 (diff | hist) . . (+2,309) . . N Mechanical Rigidity/Voxel Ox 8020 (Created page with "= Voxel Ox: 8020 frame parts = In this thread the use of 8020 frame parts is demonstrated: http://forums.reprap.org/read.php?177,702346,702528#msg-702528 File:Voxel_ox_802...") (current)
- 14:55, 15 May 2017 (diff | hist) . . (+1,171) . . N Mechanical Rigidity/Folgertech Kossel Bracing (Created page with "= Bracing on Folgertech Kossel designs = An attempt to improve the Kossel has been made, to brace the uprights: File:Folgertech_bracing.png | Bracing on the Folgertech 202...") (current)
- 14:54, 15 May 2017 (diff | hist) . . (+1,172) . . Mechanical Rigidity/Original Kossel (→Kossel Delta Printers)
- 14:51, 15 May 2017 (diff | hist) . . (+1,537) . . N Mechanical Rigidity/Original Kossel (Created page with "= Kossel Delta Printers = The Kossel is an innovative design that is unfortunately completely lacking in rigidity: File:Kossel.jpg | thumb| Kossel design: completely lacki...")
- 14:49, 15 May 2017 (diff | hist) . . (+1,479) . . N Mechanical Rigidity/Ultimaker 2 (Created page with "== Ultimaker 2: no improvement needed == The Ultimaker 2 is an excellent example of a completely rigid cube design: File:Ultimaker-2-design.png| Excellent Cube Design: Ult...") (current)
- 14:49, 15 May 2017 (diff | hist) . . (+5,116) . . N Mechanical Rigidity/Cube Example (Created page with "= Cube design needing improvement = Here is a design where some advice was asked here http://forums.reprap.org/read.php?177,722199: File:Example-cube-design.png| Example C...") (current)
- 14:48, 15 May 2017 (diff | hist) . . (-1,090) . . Mechanical Rigidity/Mendel (Undo revision 179544 by Lkcl (talk))
- 14:47, 15 May 2017 (diff | hist) . . (+2,260) . . N Mechanical Rigidity/Mendel90 (Created page with "= Mendel90 (by nophead) - significant improvements = Chris Palmer (aka nophead) is an experienced engineer who inspired significant design improvements to the original Mendel...") (current)
- 14:46, 15 May 2017 (diff | hist) . . (+1,090) . . Mechanical Rigidity/Mendel
- 14:42, 15 May 2017 (diff | hist) . . (+1,170) . . N Mechanical Rigidity/Mendel (Created page with "= Mendel (Early Prusa) inadequate design characteristics = The very early Mendels (some of which are still copied and sold, particularly in China) are classic examples of sig...")
- 09:56, 15 May 2017 (diff | hist) . . (+2) . . m Mechanical Rigidity (→MendelFlex)
- 09:55, 15 May 2017 (diff | hist) . . (0) . . N File:MendelFlex 020.png (current)
- 09:54, 15 May 2017 (diff | hist) . . (+1,510) . . Mechanical Rigidity (add MendelFlex)
- 09:41, 14 May 2017 (diff | hist) . . (+31) . . m Mechanical Rigidity (→Triple lead screws, dual rails)
- 08:21, 14 May 2017 (diff | hist) . . (+26) . . Mechanical Rigidity (→Mendel style printbeds)
- 08:11, 14 May 2017 (diff | hist) . . (+291) . . Mechanical Rigidity (→Kossel Delta Printers)
- 07:54, 14 May 2017 (diff | hist) . . (+19) . . Mechanical Rigidity (→Mechanical Rigidity)
- 15:02, 13 May 2017 (diff | hist) . . (+155) . . Mechanical Rigidity (→Fusebox: inadequate 8mm rods, single lead screw, cantilevered bed with insufficient support)
- 14:59, 13 May 2017 (diff | hist) . . (+68) . . Mechanical Rigidity (→Triple lead screws, dual rails)
- 14:56, 13 May 2017 (diff | hist) . . (+49) . . Mechanical Rigidity (→Mendel style printbeds)
- 14:55, 13 May 2017 (diff | hist) . . (+160) . . Mechanical Rigidity (→Bracing on Folgertech Kossel designs)
- 14:48, 13 May 2017 (diff | hist) . . (+58) . . Mechanical Rigidity (→Cube design needing improvement)
- 14:27, 13 May 2017 (diff | hist) . . (+119) . . Mechanical Rigidity (→Cube design needing improvement)
- 07:39, 13 May 2017 (diff | hist) . . (+81) . . Mechanical Rigidity (→Mechanical Rigidity)
- 06:47, 13 May 2017 (diff | hist) . . (-40) . . Mechanical Rigidity (→Mechanical Rigidity)
- 17:02, 12 May 2017 (diff | hist) . . (+651) . . Mechanical Rigidity (→Mendel90 (by nophead) - significant improvements)
- 16:50, 12 May 2017 (diff | hist) . . (+16) . . m Mechanical Rigidity (→Mendel (Early Prusa) inadequate design)
- 16:49, 12 May 2017 (diff | hist) . . (-1) . . m Mechanical Rigidity (→Mechanical Rigidity)
- 16:48, 12 May 2017 (diff | hist) . . (+152) . . Mechanical Rigidity (→Mechanical Rigidity)
- 16:44, 12 May 2017 (diff | hist) . . (+68) . . Mechanical Rigidity (→Mechanical Rigidity)
- 14:15, 12 May 2017 (diff | hist) . . (+143) . . Mechanical Rigidity (→Voxel Ox: 8020 frame parts)
- 14:12, 12 May 2017 (diff | hist) . . (0) . . N File:Voxel ox 8020.png (current)
- 14:12, 12 May 2017 (diff | hist) . . (-1) . . Mechanical Rigidity (→Proposed (Hexagon) Kossel Delta Frame)
- 14:09, 12 May 2017 (diff | hist) . . (+127) . . Mechanical Rigidity (→Cube design needing improvement)
- 14:05, 12 May 2017 (diff | hist) . . (+91) . . Mechanical Rigidity (→Mechanical Rigidity)
- 14:03, 12 May 2017 (diff | hist) . . (+105) . . m Mechanical Rigidity (→Mechanical Rigidity)
- 14:01, 12 May 2017 (diff | hist) . . (+256) . . Mechanical Rigidity (→Mechanical Rigidity)
- 13:45, 12 May 2017 (diff | hist) . . (+4) . . m Mechanical Rigidity (→Ultimaker 2: no improvement needed)
- 13:42, 12 May 2017 (diff | hist) . . (+419) . . Mechanical Rigidity (→Cube design needing improvement)
- 13:36, 12 May 2017 (diff | hist) . . (+1,009) . . Mechanical Rigidity (→Mechanical Rigidity)
- 13:26, 12 May 2017 (diff | hist) . . (+405) . . Mechanical Rigidity (→Triple lead screws, dual rails)
- 13:23, 12 May 2017 (diff | hist) . . (+1,950) . . Mechanical Rigidity (→Voxel Ox: 8020 frame parts)
- 13:08, 12 May 2017 (diff | hist) . . (+220) . . Mechanical Rigidity (→Bracing on Folgertech Kossel designs)
- 12:57, 12 May 2017 (diff | hist) . . (+10) . . m Mechanical Rigidity (→Proposed (Hexagon) Kossel Delta Frame)
- 12:56, 12 May 2017 (diff | hist) . . (+533) . . Mechanical Rigidity (→Kossel Delta Printers)
- 12:51, 12 May 2017 (diff | hist) . . (+1,298) . . Mechanical Rigidity (→Kossel Delta Printers)
- 12:34, 12 May 2017 (diff | hist) . . (+211) . . Mechanical Rigidity (→Bracing on Folgertech Kossel designs)
- 12:32, 12 May 2017 (diff | hist) . . (0) . . N File:Folgertech bracing.png (current)
- 12:31, 12 May 2017 (diff | hist) . . (+7) . . Mechanical Rigidity (→Kossel Delta Printers)
- 12:27, 12 May 2017 (diff | hist) . . (+1,314) . . Mechanical Rigidity (→Ultimaker 2: no improvement needed)
- 12:13, 12 May 2017 (diff | hist) . . (+128) . . Mechanical Rigidity (→Mechanical Rigidity)
- 12:10, 12 May 2017 (diff | hist) . . (+903) . . Mechanical Rigidity (→Laser-cut acrylic / wood, single lead screw, dual rods cantilevered design)
- 12:04, 12 May 2017 (diff | hist) . . (0) . . N File:Cupcake cantilever upgrade.png (current)
- 12:03, 12 May 2017 (diff | hist) . . (+273) . . Mechanical Rigidity (→Triple lead screws, dual rails)
- 11:18, 12 May 2017 (diff | hist) . . (+1,107) . . Mechanical Rigidity (→Printbed Examples)
- 11:10, 12 May 2017 (diff | hist) . . (+1,020) . . Mechanical Rigidity (→Cube design needing improvement)
- 11:00, 12 May 2017 (diff | hist) . . (+5) . . Mechanical Rigidity (replace rhombus with parallelogram)
- 10:59, 12 May 2017 (diff | hist) . . (0) . . File:Example-early-mendel-prusa.png (Lkcl uploaded a new version of "File:Example-early-mendel-prusa.png": remove black borders) (current)
- 10:59, 12 May 2017 (diff | hist) . . (0) . . File:Mendel90-improvements.png (Lkcl uploaded a new version of "File:Mendel90-improvements.png": reduce image size) (current)
- 10:56, 12 May 2017 (diff | hist) . . (+1,199) . . Mechanical Rigidity (→Mendel90 (by nophead) - significant improvements)
- 10:47, 12 May 2017 (diff | hist) . . (0) . . N File:Mendel90-improvements.png
- 10:46, 12 May 2017 (diff | hist) . . (+1,279) . . Mechanical Rigidity (→Mendel (Early Prusa) inadequate design)
- 10:38, 12 May 2017 (diff | hist) . . (0) . . N File:Example-early-mendel-prusa.png
- 10:37, 12 May 2017 (diff | hist) . . (+288) . . Mechanical Rigidity (→Cube design needing improvement)
- 10:31, 12 May 2017 (diff | hist) . . (0) . . N File:Fusebox cantilevered bed.png (current)
- 10:31, 12 May 2017 (diff | hist) . . (+2,518) . . Mechanical Rigidity (→Triple lead screws, dual rails)
- 10:00, 12 May 2017 (diff | hist) . . (+1,265) . . Mechanical Rigidity (→= Triple lead screws, dual rails)
- 09:51, 12 May 2017 (diff | hist) . . (0) . . N File:Triple lead dual rails.png (current)
- 09:50, 12 May 2017 (diff | hist) . . (+597) . . Mechanical Rigidity (→Examples)
- 09:32, 12 May 2017 (diff | hist) . . (+1,290) . . Mechanical Rigidity (→Ultimaker 2: no improvement needed)
- 09:24, 12 May 2017 (diff | hist) . . (0) . . N File:Ultimaker-2-design.png (current)
- 09:23, 12 May 2017 (diff | hist) . . (+187) . . Mechanical Rigidity (add Ultimaker 2 design)
- 09:21, 12 May 2017 (diff | hist) . . (+87) . . Mechanical Rigidity (→Examples)
- 09:16, 12 May 2017 (diff | hist) . . (+3,138) . . Mechanical Rigidity (→Examples)
- 08:52, 12 May 2017 (diff | hist) . . (0) . . N File:Example-cube-design.png (current)
- 08:50, 12 May 2017 (diff | hist) . . (+166) . . Mechanical Rigidity (→Mechanical Rigidity)
- 08:46, 12 May 2017 (diff | hist) . . (+1,489) . . N Mechanical Rigidity (start a page on mechanical rigidity design advice)
- 17:56, 10 May 2017 (diff | hist) . . (+50) . . Riki200 (add link to MGN9C HIWIN rails)
- 09:21, 10 May 2017 (diff | hist) . . (+44) . . Riki200 (add reprap forum link)
- 07:18, 10 May 2017 (diff | hist) . . (+12) . . Riki200 (→Introduction)
- 06:26, 10 May 2017 (diff | hist) . . (-22) . . Riki200 (remove image, was for sandwich200)
- 06:25, 10 May 2017 (diff | hist) . . (+4,290) . . N Riki200 (initial create, copy from sandwich200)
- 07:42, 10 June 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0) (current)
- 07:52, 25 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.1 ("Unnamed" plotter arrangement))
- 15:34, 24 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.1 ("Unnamed" plotter arrangement))
- 13:02, 19 May 2016 (diff | hist) . . (+610) . . Sandwich200
- 12:57, 19 May 2016 (diff | hist) . . (+92) . . Sandwich200 (→Revision 2.0)
- 09:39, 16 May 2016 (diff | hist) . . (+1) . . SCOUTcorexy (spelling correction)
- 18:57, 15 May 2016 (diff | hist) . . (-25) . . Sandwich200 (→Version 2.0)
- 18:53, 15 May 2016 (diff | hist) . . (+302) . . Sandwich200 (→Version 1.0)
- 17:55, 15 May 2016 (diff | hist) . . (+453) . . Sandwich200 (→Version 2.0)
- 09:21, 14 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Printing on the v2.0)
- 07:48, 14 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Printing on the v2.0)
- 07:43, 14 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Printing on the v2.0)
- 07:17, 14 May 2016 (diff | hist) . . (-17) . . m Sandwich200 (→Printing on the v2.0)
- 07:16, 14 May 2016 (diff | hist) . . (+78) . . Sandwich200 (→Revision 2.0)
- 07:12, 14 May 2016 (diff | hist) . . (-49) . . Sandwich200
- 06:57, 14 May 2016 (diff | hist) . . (0) . . N File:Sandwich200v2.jpeg (current)
- 05:33, 12 May 2016 (diff | hist) . . (+45) . . Sandwich200 (→Revision 2.0)
- 05:11, 12 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 07:34, 11 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 08:08, 9 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 07:25, 9 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 13:13, 7 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 05:31, 6 May 2016 (diff | hist) . . (+37) . . Sandwich200 (→Revision 2.0)
- 19:01, 2 May 2016 (diff | hist) . . (-37) . . Sandwich200 (→Version 2.0)
- 08:52, 28 April 2016 (diff | hist) . . (+82) . . Sandwich200 (→Videos)
- 16:30, 26 April 2016 (diff | hist) . . (-8,711) . . Sandwich200 (move analysis to separate article)
- 11:56, 24 April 2016 (diff | hist) . . (+101) . . Sandwich200 (→Gallery)
- 15:00, 23 April 2016 (diff | hist) . . (+254) . . Sandwich200 (→Version 2.0)
- 11:59, 22 April 2016 (diff | hist) . . (+1,238) . . Sandwich200 (→Version 1.0)
- 16:59, 21 April 2016 (diff | hist) . . (+35) . . Sandwich200 (→Version 1.0)
- 05:41, 21 April 2016 (diff | hist) . . (-1) . . m Sandwich200 (→Comparative Analysis (or, "why another folding, portable 3d printer?"))
- 05:40, 21 April 2016 (diff | hist) . . (0) . . m Sandwich200 (→Comparative Analysis (or, "why another folding, portable 3d printer?"))
- 05:39, 21 April 2016 (diff | hist) . . (+1) . . m Sandwich200 (→Comparative Analysis (or, "why another folding, portable 3d printer?")
- 18:01, 19 April 2016 (diff | hist) . . (+441) . . Sandwich200 (→Features)
- 10:34, 18 April 2016 (diff | hist) . . (0) . . Sandwich200
- 09:53, 18 April 2016 (diff | hist) . . (+125) . . Sandwich200
- 09:42, 18 April 2016 (diff | hist) . . (+37) . . Sandwich200 (→Videos)
- 19:20, 17 April 2016 (diff | hist) . . (+33) . . Sandwich200 (→Gallery)
- 18:31, 17 April 2016 (diff | hist) . . (+309) . . G-code (latest versions of RepRapFirmware do not set extruder to relative when G91 is used, it is necessary to use M83 as a separate additional command. Marlin at least sets X,Y,Z *AND* extrude to relative on G91.)
- 05:55, 15 April 2016 (diff | hist) . . (+278) . . Sandwich200
- 20:14, 12 April 2016 (diff | hist) . . (+37) . . Sandwich200 (→Videos)
- 06:24, 12 April 2016 (diff | hist) . . (+1,219) . . Sandwich200
- 06:14, 12 April 2016 (diff | hist) . . (+2,102) . . Sandwich200
- 17:55, 10 April 2016 (diff | hist) . . (0) . . m Sandwich200
- 10:01, 9 April 2016 (diff | hist) . . (+200) . . Sandwich200
- 09:51, 9 April 2016 (diff | hist) . . (+1) . . m Sandwich200 (→To-order or cutting aluminium extrusion)
- 09:48, 9 April 2016 (diff | hist) . . (+220) . . Sandwich200
- 09:43, 9 April 2016 (diff | hist) . . (+36) . . m Sandwich200 (→Bill of Materials)
- 09:10, 9 April 2016 (diff | hist) . . (+6) . . m File:Sandwich200 bom.pdf (current)
- 08:24, 9 April 2016 (diff | hist) . . (+1,504) . . Sandwich200
- 11:02, 8 April 2016 (diff | hist) . . (+75) . . Sandwich200 (→M3 hex socket)
- 10:56, 8 April 2016 (diff | hist) . . (0) . . File:Sandwich200 bom.pdf (Lkcl uploaded a new version of "File:Sandwich200 bom.pdf")
- 06:18, 8 April 2016 (diff | hist) . . (+1,883) . . Sandwich200
- 21:08, 6 April 2016 (diff | hist) . . (+620) . . Sandwich200 (→Printbed Issues)
- 19:21, 6 April 2016 (diff | hist) . . (+144) . . Sandwich200
- 19:07, 6 April 2016 (diff | hist) . . (+391) . . Sandwich200 (→Version 1.0)
- 19:01, 6 April 2016 (diff | hist) . . (+93) . . m Sandwich200 (→Frame)
- 18:56, 6 April 2016 (diff | hist) . . (+3,804) . . Sandwich200
- 18:23, 6 April 2016 (diff | hist) . . (+1,008) . . Sandwich200
- 17:48, 6 April 2016 (diff | hist) . . (+144) . . Sandwich200
- 07:33, 6 April 2016 (diff | hist) . . (+203) . . Sandwich200 (→Features)
- 07:03, 6 April 2016 (diff | hist) . . (+37) . . Sandwich200 (→Videos)
- 06:41, 6 April 2016 (diff | hist) . . (+413) . . Sandwich200 (→Version 1.0)
- 17:06, 5 April 2016 (diff | hist) . . (+34) . . Sandwich200 (→Videos)
- 17:04, 5 April 2016 (diff | hist) . . (+249) . . Sandwich200 (→Version 1.0)
- 16:55, 5 April 2016 (diff | hist) . . (+18) . . m Sandwich200
- 16:54, 5 April 2016 (diff | hist) . . (+16) . . Sandwich200
- 07:40, 5 April 2016 (diff | hist) . . (+38) . . Sandwich200 (→Tools)
- 12:32, 4 April 2016 (diff | hist) . . (+1,575) . . Sandwich200
- 11:59, 4 April 2016 (diff | hist) . . (+172) . . Sandwich200
- 11:56, 4 April 2016 (diff | hist) . . (+103) . . N File:Sandwich200 bom.pdf (auto-generated, do not edit - use git clone http://hands.com/~lkcl/foldable3dsandwich200 and run "make")
- 11:50, 4 April 2016 (diff | hist) . . (+89) . . Sandwich200
- 11:45, 4 April 2016 (diff | hist) . . (-29) . . m Sandwich200 (→Features)
- 11:38, 4 April 2016 (diff | hist) . . (0) . . N File:Sandwich200v1.png (current)
- 11:34, 4 April 2016 (diff | hist) . . (+2,336) . . N Sandwich200 (first version of page for sandwich200)
- 07:36, 1 March 2016 (diff | hist) . . (-1) . . Slic3r (classic late 20th century spelling mistake substituting the two words "it" and "is" in shortened form "i t apostrophe s" when the relative pronoun "its" was intended instead. we do not live in medieval times, where spelling was optional.)
- 09:10, 28 February 2016 (diff | hist) . . (+76) . . Admin (move core team sentence to top of page so that people don't try to contact the Core Team when they should be contacting the sysops)
- 05:51, 23 February 2016 (diff | hist) . . (+132) . . Sandwich300 (→Design Goals) (current)
- 05:39, 23 February 2016 (diff | hist) . . (+1,895) . . N Sandwich300 (Created page with "{{Development |name = Sandwich300 |status = experimental |image = |description = Compact Folding 300x300mm Reprap-style 3D printer |license = GPL |author = lkcl |reprap =...")
- 22:56, 8 February 2015 (diff | hist) . . (+67) . . KosselHybrid (→Links)
- 22:37, 8 February 2015 (diff | hist) . . (+62) . . KosselHybrid (→Links)
- 22:33, 8 February 2015 (diff | hist) . . (+41) . . m KosselHybrid (→Links)
- 22:33, 8 February 2015 (diff | hist) . . (+166) . . KosselHybrid (→Links)
- 22:30, 8 February 2015 (diff | hist) . . (+89) . . KosselHybrid (add link to reprap.org site about 42BYGHM809 motors)
- 22:24, 8 February 2015 (diff | hist) . . (+79) . . KosselHybrid (add 400steps/rev NEMA-17 motor)
- 22:04, 8 February 2015 (diff | hist) . . (-2) . . KosselHybrid
- 19:41, 8 February 2015 (diff | hist) . . (+54) . . KosselHybrid (→Links)
- 19:34, 8 February 2015 (diff | hist) . . (+90) . . KosselHybrid (→Links)
- 19:32, 8 February 2015 (diff | hist) . . (+146) . . KosselHybrid (→Links)
- 16:18, 8 February 2015 (diff | hist) . . (+236) . . KosselHybrid (add more research links into kossel parts)
- 13:55, 6 February 2015 (diff | hist) . . (+62) . . KosselHybrid (add link to magnetic rod end parts)
- 13:54, 6 February 2015 (diff | hist) . . (+178) . . KosselHybrid (add link to triple fan arrangement)
- 13:49, 6 February 2015 (diff | hist) . . (-148) . . KosselHybrid (remove design goals accidentally included from copying kossel page (inconsistency in kossel page??))
- 13:48, 6 February 2015 (diff | hist) . . (+49) . . KosselHybrid
- 13:46, 6 February 2015 (diff | hist) . . (+62) . . KosselHybrid (mention design source of the heated bed and glass plate)
- 13:45, 6 February 2015 (diff | hist) . . (+152) . . KosselHybrid (add link to kosselpro horizontal beams source)
- 13:43, 6 February 2015 (diff | hist) . . (+1,858) . . KosselHybrid (replacing annoying anti-spam circumvention edits with proper text)
- 13:42, 6 February 2015 (diff | hist) . . (+257) . . KosselHybrid
- 13:40, 6 February 2015 (diff | hist) . . (+66) . . m KosselHybrid
- 13:40, 6 February 2015 (diff | hist) . . (+52) . . m KosselHybrid
- 13:40, 6 February 2015 (diff | hist) . . (+53) . . m KosselHybrid
- 13:39, 6 February 2015 (diff | hist) . . (+536) . . N KosselHybrid (initial version forced to be truncated in order to circumvent pointless anti-spam rules)