Category:MOST
|
By Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source RepRap 3-D printing and recyclebot recycling. |
|
| This page is part of an international project hosted by MOST to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.
Research: Open source 3-D printing of OSAT • RecycleBot • LCA of home recycling • Green Distributed Recycling • Ethical Filament • LCA of distributed manufacturing • RepRap LCA Energy and CO2 • Solar-powered RepRaps • solar powered recyclebot • Feasibility hub • Mechanical testing • Lessons learned • MOST RepRap Build Make me: Want to build a MOST RepRap? - Start here! • Delta Build Overview:MOST • Athena Build Overview • MOST metal 3-D printer • Humanitarian Crisis Response 3-D Printer |
This is the category that will contain all of MOST's RepRap projects...coming soon.
Articles
2018
https://ultimaker.com/en/resources/52519-how-to-install-a-heated-bed-and-printhead-heater-cartridge-for-the-ultimaker-2-go https://ultimaker.com/en/blog/52019-3d-printers-in-the-public-library-finland-ahead-of-the-curve https://ultimaker.com/en/blog/52513-tricks-for-telling-if-your-3d-print-is-good-enough-for-your-bike https://gallery.mailchimp.com/b828011d5efa3a4ac7941e0f4/files/f80f7abb-7ef6-4a24-8ddb-77e536a5067b/Chapter_4_min.pdf
2017
https://www.machinedesign.com/3d-printing/low-cost-3d-printers-are-growing https://www.huffingtonpost.com/entry/can-you-earn-1000-roi-with-3-d-printing-at-home_us_58aa39fbe4b0fa149f9ac809 https://opensource.com/article/17/3/how-to-create-consumer-goods-open-hardware https://3dprintingindustry.com/news/3d-printing-next-five-years-prof-joshua-pearce-108554/ https://ultimaker.com/en/blog/38397-three-reasons-for-open-source-tech-in-your-3d-printing-classroom https://opensource.com/article/17/4/open-hardware-nitrate-testing-photometer https://www.materialstoday.com/amorphous/news/first-issue-of-hardwarex-published/ https://opensource.com/article/17/5/open-source-3d-printing-filament https://opensource.com/article/17/7/3D-print-breast-prosthetic https://opensource.com/article/17/7/save-planet-board-game https://www.elsevier.com/connect/hardwarex-journal-reveals-the-equipment-behind-the-science https://www.nae.edu/19582/Bridge/174695.aspx https://opensource.com/article/17/10/rise-open-source https://opensource.com/article/17/12/paying-it-forward-aalto-fab-lab https://ultimaker.com/en/blog/52225-how-to-use-openscad-to-design-for-3d-printing
Subcategories
This category has the following 3 subcategories, out of 3 total.
Pages in category "MOST"
The following 141 pages are in this category, out of 141 total.
3
- 3-D printable open source dual axis gimbal system for optoelectronic measurements
- 3-D printable photovoltaic module spacer
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3-D printing open-source click-MUAC bands for identification of malnutrition
- 3-D Printing Solar Photovoltaic Racking in Developing World
- 3D Metal Printing Slicer Plugin
A
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- Aluminum substrate cleaning for 3-D printing:MOST
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applications of RepRap distributed production - literature review
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Athena Build Overview
B
C
D
- Delta Build Overview:MOST
- Delta Build Workshop
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Development and feasibility of applications for the RepRap 3-D printer
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
E
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Expanded microchannel heat exchanger
- Expanded microchannel heat exchanger: Non-destructive evaluation
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Franklin Firmware on GigabotHX:MOST
- Franklin:MOST
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and open-source automated 3-D microscope
- Free and Open-source Control Software for 3-D Motion and Processing
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
G
I
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
- Improving recyclebot concepts
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer
L
- Laser welding protocol: MOST
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of polymer recycling literature review
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing
M
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Mechanical testing of polymer components made with the RepRap 3-D printer
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities
- Modular Design for Spherical Microphone Arrays
- Template:MOST
- MOST Metal Cura
- MOST open-source metal 3-D printer v2
- MOST quad delta RepRap
- MOST RepRap
- MOST RepRap Build
- MOST Reprap Printing Lessons
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer
O
- Open Source 3-D Printed Nutating Mixer
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities
- Open source 3-D printing of OSAT
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain
- Open Source Lab
- Open Source Laboratory Sample Rotator Mixer and Shaker
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds
- Open source laser system for polymeric welding
- Open Source Low-Cost Power Monitoring System
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing
- Open Source Polymer Welder Literature Review
- Open source rapid prototyping of OSAT
- Open source science
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem
- Open-source 3-D Printing in Managing Humanitarian Innovation
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom
- Open-source 3D-printable optics equipment
- Open-Source Automated Mapping Four-Point Probe
- Open-source colorimeter
- Open-source hardware for research and education
- Open-source metal 3-D printer
- Open-source mobile water quality testing platform
- Open-source nanotechnology: solutions to a modern intellectual property tragedy
- Open-source parametric 3-D printed slot die system for thin film semiconductor processing
- Open-Source Photometric System for Enzymatic Nitrate Quantification
- Open-source syringe pump
- Open-Source Three-Dimensional Printable Infant Clubfoot Brace
- Open-source Wax RepRap 3-D Printer
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics
- Open-source, self-replicating 3-D printer factory for small-business manufacturing
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms
- OSAT
P
R
- Recyclebot
- RecycleBot modification - automated feeder
- RepRap Mechanical Testing Literature Review
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament
- Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses
S
- Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems
- Slicer and process improvements for open-source GMAW-based metal 3-D printing
- Solar powered distributed customized manufacturing
- Solar powered recyclebot literature review
- Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware
- Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing
T
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing
- Tensile test protocol: MOST
- The Effects of PLA Color on Material Properties of 3-D Printed Components
- The RepRap 3-D Printer Revolution in STEM Education
- Thermal properties of 3-D printed polylactic acid-metal composites
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views
- Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype
