Search results
Create the page "Paste" on this wiki! See also the search results found.
- This page is a copy and paste from what [[User:Johnnyr|Johnnyr]] posted in [[RAMPS]], and will have many10 KB (1,696 words) - 17:01, 5 April 2014
- open a browser and paste the above ip : '''http://SERVER_IP:SERVER_PORT/index.html''' to use the int5 KB (756 words) - 17:19, 22 December 2014
- ...otplate reflow method. There is not too many pads facilitating easy solder paste application using a syringe, and the components should be spaced out enough16 KB (2,587 words) - 07:51, 2 June 2020
- ...or small molds. For larger molds you should use a professional grade core paste and/or mold weights/metal clamps to hold the mold together.37 KB (5,672 words) - 15:05, 12 June 2021
- ...or small molds. For larger molds you should use a professional grade core paste and/or mold weights/metal clamps to hold the mold together.35 KB (5,213 words) - 18:01, 27 December 2014
- ...er]] for placing solder paste on the PCB (although a squeegee and a solder paste stencil is probably faster if you're making more than one PCB) ...ive devices such as LEDs from overheating and to still properly reflow the paste at every solder joint. However, I ([[User:ErikDeBruijn|Erik]]) have good ex9 KB (1,390 words) - 21:17, 1 December 2022
- (? silicon sealant/cooling fan/cooling paste/kapton ?) * 1x Cooling paste upto 150C (can be used in between printbed and heater blocks for better hea28 KB (4,466 words) - 08:32, 30 December 2014
- Do not paste large quantities of text into the channel : use http://pastebin.com instead7 KB (1,296 words) - 02:55, 23 February 2024
- ===Peristaltic Paste Extruders=== The paste extruders will extrude viscous one part epoxy compounds, one conductive, an4 KB (647 words) - 22:29, 12 July 2011
- ...ial firmware, the following have been taken out: -pid control -A3949 hack -paste extruder. For a change this has simple bang bang control, and it can read a24 KB (4,111 words) - 21:46, 10 February 2013
- <tr><td>'''[[RJ Paste Extruder]] (Stub)'''</td><td>[[#Experimental|Experimental]]</td><td>''[[#Le ...</td><td>''[[#LessThan1YearAgo|< 1 year ago]]''</td><td>[[#Paste Dispenser|Paste Dispenser]], [[#Toolheads|Toolheads]]</td></tr>325 KB (49,064 words) - 06:16, 11 December 2011
- ...es from one set need to be ported to others... less common components like paste extruders, heated bed, etc. are more difficult to configure.26 KB (4,792 words) - 10:51, 28 February 2020
- *Small tube heat transfer paste3 KB (504 words) - 00:24, 25 November 2013
- * Paste the following code into the text area:5 KB (832 words) - 09:37, 2 December 2011
- Solder paste, hot plate or oven ...et a cold solder). Then solder the other pad. Also popular is using solder paste for pad by pad soldering, Oven Reflow (need link), and [[HotplateReflowTech57 KB (9,372 words) - 19:00, 11 December 2022
- * Open wordpad or notepad and use Cntrl+P to paste the entire worksheet into the file1 KB (193 words) - 06:35, 11 January 2015
- Silicone hi temperature paste for RC model motors COPPER XST 85g (tube for 4euro).7 KB (1,068 words) - 12:14, 30 April 2014
- {{Languages|Davids Paste Extruder}} |description = Geared Nema17 Paste Extruder4 KB (593 words) - 05:26, 15 August 2012
- ...r extrudes thin threads of metal clay that have been blended into a liquid paste. The liquified clay is thick enough to hold shape as it is laid down, but l ...e water that forms at the top of bottled ketchup and letting the thick red paste flow through, giving a perfect squirt every time.152 KB (22,645 words) - 01:20, 30 August 2019
- Freely copy and paste them on all things RepRap. Print them into reprapped parts. Distribute as785 bytes (132 words) - 23:27, 10 March 2012
- Mostly this work is a ‘copy&paste’ of sites' critical info, links with useful material, and some of my expe ...as Sprinter. So, if you have already sprinter on your electronics you can paste most of your settings to Marlin. Main improvement over sprinter is the look103 KB (16,604 words) - 18:55, 17 October 2020
- ...nt etc. dissolved in a small amount of solvent so it is gel-like, a thick paste. Extrude this, allow the solvent to evaporate to produce a deposit of the8 KB (1,313 words) - 12:12, 7 March 2013
- ...of OpenSCAD you have to select Design->Display-CSG-tree..., then copy and paste all the text in the window that pops up into the file '''my_model.csg'''.)19 KB (2,766 words) - 02:12, 6 June 2020
- =Stepper Paste Extruder= ...f a paste extruder using a Nema17 stepper motor. The idea behind a stepper paste extruder would be to unleash the possibilities of RepRaps printing with mat1 KB (171 words) - 13:42, 9 December 2013
- ...rge SMT parts, so it's pretty simple to solder, especially with the solder paste / hotplate method. [[Stepper_Motor_Driver_2_3|Read the documentation page23 KB (3,496 words) - 07:24, 1 May 2018
- ...t see this option download the newest sanguino drivers from their site and paste them into arduino's hardware folder]) simply click "burn bootloader" from "4 KB (664 words) - 01:01, 23 August 2015
- ...e device (works on Linux, Windows and MAC OS) - you will just need to copy/paste new firmwares to board as if is a USB pen flash;25 KB (3,462 words) - 19:38, 28 October 2019
- ### Compile firmware within Arduino. You will need to copy and paste the compiled .HEX file into the HID application directory. The HEX file is23 KB (3,566 words) - 13:32, 11 March 2020
- ==[[Mattroberts' Huxley Paste Extruder]]==4 KB (693 words) - 05:25, 21 May 2014
- Chocolate is one material which has a {{tag|paste}}-like consistency when molten and a limited ability to be extruded into a2 KB (361 words) - 12:03, 18 March 2012
- ...T and heatsink was carefully cleaned from paint, of course, but no thermal paste was applied. It was taken care to not blow against the heatsink to not fals20 KB (3,305 words) - 09:18, 21 October 2014
- #REDIRECT [[Paste Extrusion]]29 bytes (3 words) - 12:40, 28 November 2012
- #REDIRECT [[Paste Extrusion]]29 bytes (3 words) - 12:40, 28 November 2012
- #REDIRECT [[Paste Extrusion]]29 bytes (3 words) - 12:41, 28 November 2012
- #REDIRECT [[Paste Extrusion]]29 bytes (3 words) - 12:41, 28 November 2012
- [[Category:Paste Extruders]]250 bytes (36 words) - 05:27, 20 March 2012
- * Optionally, put some thermal paste between the MOSFET and the heatsink.10 KB (1,626 words) - 15:27, 7 March 2016
- Eine andere Lösung sind Wärmeleit-Paste oder Wärmeleit-Pads zwischen Chip und Kühlkörper. Die Pads sind in unser5 KB (761 words) - 19:16, 1 February 2014
- ...code are not included here in order that you might be inspired to cut and paste it into a running openSCAD to see how it looks. You should change some of ...code are not included here in order that you might be inspired to cut and paste it into a running openSCAD to see how it looks. You should change some of23 KB (3,679 words) - 14:10, 5 April 2023
- ...not copy the pre and /pre statements at very beginning and end of code), Paste (ctrl+V) this into a blank document in ''notepad + +'' and then save this42 KB (5,515 words) - 09:18, 16 May 2015
- [[Paste Extrusion]] main page. [http://www.thingiverse.com/thing:20733 Universal paste extruder], consists of a syringe on which is pulled by a servo.195 bytes (26 words) - 12:47, 15 November 2014
- ...200 grit paper. Then put the final polish on the rod using metal polishing paste (the same stuff as what people use to polish their car wheels). In about tw2 KB (382 words) - 11:56, 5 November 2014
- ...eral ways that this procedure could be made more automatic. For example, a paste extruder on a reprap can make a silicone mold directly, which can be used t6 KB (997 words) - 01:02, 4 August 2012
- |description = Paste Extruder |cadModel = [[File:MR Huxley Paste Extruder.zip]]6 KB (972 words) - 18:18, 3 August 2012
- {{Languages|Davids Paste Extruder}} Thermal paste or fire cement (see below re this)15 KB (2,668 words) - 02:27, 8 June 2013
- ***add overprint to paste layer for fuse holder11 KB (1,599 words) - 02:38, 19 August 2018
- Copy and paste the Arduino program below into a sketch in the Arduino development environm7 KB (1,144 words) - 08:08, 23 November 2013
- .... this one was actually casted in a mold, but given a concrete printer, or paste extruder like one, this could be printed even in ceramics. so this is not d2 KB (383 words) - 14:49, 4 January 2015
- [[Category:Paste]]1 KB (230 words) - 19:28, 27 December 2014
- * Soldering paste ...e to solder the parts together. I use a small blowtorch and some soldering paste for that. At 610°C the solder melts. It isn't difficult at all. But be car6 KB (979 words) - 09:39, 15 November 2014
- ...rename the original file first to something like arduino_pins_ORIG.c then paste this file into the folder. That's it for updating your arduino IDE. ...your marlin.pde and go to the fastio.h tab. Go down to line 1387 and copy/paste the following lines directly below the line that reads <b>#define DIO69_PWM10 KB (1,615 words) - 17:39, 15 November 2016
- - Soldering paste ...is is useful for inserting the steel tube as well as putting the soldering paste into.7 KB (1,116 words) - 11:02, 11 September 2013
- ...mounting the heater cartridge the prototype did not require any heat sink paste or glue. With a close fitting hole and a heater cartridge there is plenty8 KB (1,505 words) - 23:57, 28 January 2013
- ...of OpenSCAD you have to select Design->Display-CSG-tree..., then copy and paste all the text in the window that pops up into the file '''my_model.csg'''.)20 KB (3,400 words) - 06:39, 11 January 2015
- {{ merge from | universal paste extruder }} |description = Geared Nema17 Paste Extruder876 bytes (95 words) - 12:47, 15 November 2014
- the tube and solder both using L-Ag55 solder paste. Keep the other side of the nozzle cool.5 KB (843 words) - 00:33, 22 July 2014
- ...= {{tag|Extruders}}[[:Category:Paste Extruders|Paste Extruders]][[Category:Paste Extruders]]937 bytes (137 words) - 00:24, 29 May 2013
- * note links need to be cut and paste into browser. for some reason reprap.org is seeing these as external links.2 KB (354 words) - 20:42, 12 September 2017
- ** Apply solder paste to every exposed SMD pad.11 KB (1,585 words) - 05:59, 29 November 2014
- ** Apply solder paste to every exposed SMD pad.11 KB (1,533 words) - 03:57, 22 November 2013
- ...]][[Category:Extruders]] [[:Category:Extruders|Paste Extruders]][[Category:Paste Extruders]]3 KB (423 words) - 01:15, 15 February 2024
- ...les with large ground shields tend to get scorched on top while the solder paste on the pads below never liquefies), so I soldered the first batch of module3 KB (523 words) - 00:52, 19 March 2018
- ** Apply solder paste to every exposed SMD pad.8 KB (1,263 words) - 07:12, 10 January 2015
- '''''You will need to manually cut and paste to link to downloads, because of setup change on host web site.''''' ...program does not allow that, simply copy the command to the clipboard and paste it at once into the terminal.<br />9 KB (1,458 words) - 17:28, 2 December 2022
- ...able but easy-to-assemble and very solid. It was made with a laser-cut and paste slab of HDF (High-Density Fibreboard) colored with natural dyes, with excel3 KB (493 words) - 08:56, 24 September 2013
- ...he use not only of PLA but also other materials that need a heat source to paste the first layers<br>3 KB (481 words) - 08:14, 2 October 2013
- |description = A paste or slurry extruder with a knitted wrap ...it as the extrusion process would potentially be higher than a thixotropic paste extruding system that cannot rush the next layer. The head will also requi13 KB (2,220 words) - 15:06, 3 October 2014
- | [[RUG/Pennsylvania/State College/Universal Paste Extruder | Universal Paste Extruder]] | Details on a universal paste extruder.9 KB (1,276 words) - 18:51, 6 May 2014
- ...el your edits, close the page, and go back to the page you are working on. Paste in the copied code. Now you have example syntax for most of the things that4 KB (712 words) - 10:04, 19 September 2020
- Samples of parts, made from the paste: Paste mixed with metal powder in proportion usual for powder metallurgy (any mix3 KB (506 words) - 19:13, 27 December 2014
- : Solder paste, hot plate or oven ...ld solder joint). Then solder the other pads. Also popular is using solder paste for pad by pad soldering, Oven Reflow (need link), and [[HotplateReflowTech11 KB (1,751 words) - 18:45, 5 January 2015
- [[File:Paste-extruder-overview.jpg|thumb|Paste extruder overview]] ...s using a motor and a belt to push the plunger of a syringe containing the paste. Even though we were able to print basic objects with this kind of extruder6 KB (980 words) - 11:14, 27 October 2014
- ** Also supports laser cutting, CNC milling, paste extrusion8 KB (1,259 words) - 01:29, 9 October 2017
- : Solder paste, hot plate or oven ...ld solder joint). Then solder the other pads. Also popular is using solder paste for pad by pad soldering, Oven Reflow (need link), and [[HotplateReflowTech11 KB (1,778 words) - 11:48, 1 December 2014
- ...ated to providing detailed information on how to build and use a universal paste extruder. These types of extruders are becoming more and more popular as c Below are details about paste extrusion projects that have been completed by students using this extruder8 KB (1,234 words) - 11:21, 27 October 2014
- * clean extruder from thermal paste and, if any, check temp with an external thermocouple4 KB (581 words) - 09:52, 27 January 2016
- ...gging. Suggest a different extruder compatible with the machine such as a paste extruder or a pen plotter.2 KB (255 words) - 16:48, 3 May 2014
- ...et a cold solder). Then solder the other pad. Also popular is using solder paste for pad by pad soldering, Oven Reflow (need link), and [[HotplateReflowTech22 KB (3,149 words) - 20:31, 23 May 2020
- ...al, or similar heat resistent flexible glue. You can get away with thermal paste, but you have to make sure that the thermistor stays in the heatblock using Using thermal paste for thermal conductivity and kapton tape to fixate it can work, but it is n8 KB (1,384 words) - 10:18, 11 March 2020
- ...tor. No vertikal extrusion profiles needed. The big effector should enable paste extruders and is more stable. The electronics can be mounted on top or unde2 KB (369 words) - 05:47, 22 October 2017
- |Paste4 KB (576 words) - 13:26, 28 October 2014
- * Current tools offered: SMT vacuum nozzle, solder paste dispense, 3D Print hotend. ...shot-meter style fluid dispense system for scientific laboratory or solder paste / glue dispense.Pen plotter, laser sensitizer (not big enough to cut stuff11 KB (1,612 words) - 14:53, 10 November 2014
- Paste your file's name over the highlighted text.794 bytes (123 words) - 17:11, 6 January 2015
- Currently the paste extruder mount and support for [http://mutley3d.com/Flex3Drive/ Mutley's Fl2 KB (403 words) - 22:31, 14 May 2015
- ...e made that permit easy and rapid repurposing of the platform for milling, paste extrusion and several other applications. All of the designs are open-sourc ...d milled printed circuit boards, milled plastic objects, objects made with paste extrudates such as silicone, food stuffs and ceramics, pen plotted works an23 KB (3,910 words) - 00:35, 22 March 2018
- ...nk to it (you can use free Dropbox [http://dropbox.com], etc), or cut and paste those comments in your post (not ideal: harder to read).<br> #Paste the Dropbox link.<br>2 KB (438 words) - 21:02, 13 January 2016
- ...2012-06-01T14:34:00%2B01:00&max-results=7&start=15&by-date=false Universal paste extruder])115 KB (18,778 words) - 06:34, 6 October 2018
- ...2012-06-01T14:34:00%2B01:00&max-results=7&start=15&by-date=false Universal paste extruder])115 KB (18,793 words) - 06:31, 6 October 2018
- * In the text field below copy and paste the following script in order to setup a rainbow on virtual extruders 0 til10 KB (1,613 words) - 10:18, 14 March 2017
- ...done, see basic layout strategies, use its code (click "Edit") as a copy & paste template.}}10 KB (1,719 words) - 17:20, 27 August 2016
- ...done, see basic layout strategies, use its code (click "Edit") as a copy & paste template.}}970 bytes (144 words) - 00:16, 30 August 2016
- ...T and heatsink was carefully cleaned from paint, of course, but no thermal paste was applied. It was taken care to not blow against the heatsink to not fals27 KB (3,063 words) - 04:55, 14 January 2019
- ...done, see basic layout strategies, use its code (click "Edit") as a copy & paste template.}}877 bytes (135 words) - 06:44, 16 November 2016
- Solder paste, hot plate or oven ...et a cold solder). Then solder the other pad. Also popular is using solder paste for pad by pad soldering, Oven Reflow (need link), and [[HotplateReflowTech40 KB (6,275 words) - 05:10, 7 December 2017
- All MOSFETs should be used with heatsinks and thermal paste. The heatsinks are connected to the DRAIN of the MOSFET, and as the metal30 KB (5,090 words) - 15:15, 26 October 2017
- ...les with large ground shields tend to get scorched on top while the solder paste on the pads below never liquefies), so I soldered the first batch of module5 KB (269 words) - 12:01, 21 March 2018
- * Firing cermaics, very useful in combination with 3d printing paste extrusion. This can include metal clays, porcelain, earthenware and other m6 KB (870 words) - 08:11, 15 October 2022
- * Note also that RepRap extruders have been designed to extrude paste, as has the piston system of Fab@home.65 KB (9,156 words) - 20:48, 22 October 2018
- * [https://sites.google.com/site/hedronpasteextruder/ Hedron Paste Extruder Project] * [http://www.thingiverse.com/thing:20733 Universal paste extruder]19 KB (2,822 words) - 11:57, 2 April 2019
- ...thermistor and the sides of the heater cartridge. Do not use too much heat paste, as it can be hard to insert the heater cartridge fully into the nozzle.14 KB (2,213 words) - 11:40, 7 November 2018
