User contributions
- 11:17, 19 July 2014 (diff | hist) . . (+168) . . Plastic Blaster
- 07:14, 8 July 2014 (diff | hist) . . (+1) . . Plastic Blaster
- 07:14, 8 July 2014 (diff | hist) . . (+1) . . Plastic Blaster
- 07:13, 8 July 2014 (diff | hist) . . (+264) . . Plastic Blaster
- 07:10, 8 July 2014 (diff | hist) . . (0) . . File:Nozzle plastic blaster.jpg (AlbertDesigns uploaded a new version of "File:Nozzle plastic blaster.jpg": first prototype of a full metal (brass) nozzle, with 2x 40W heating elements. Nozzle diameter is 2.5mm, for 2 to 3mm thick printing in one go.) (current)
- 07:09, 8 July 2014 (diff | hist) . . (0) . . File:Nozzle plastic blaster.jpg (AlbertDesigns uploaded a new version of "File:Nozzle plastic blaster.jpg")
- 07:05, 8 July 2014 (diff | hist) . . (0) . . Plastic Blaster
- 07:05, 8 July 2014 (diff | hist) . . (+197) . . N File:Sample 2 5mm wall.JPG (In this picture you can see the width of the infill. Because the wall is printed in one go, the resulting object is much stronger and stiffer than it would be if the wall was made by 5 times 0.5mm.) (current)
- 07:01, 8 July 2014 (diff | hist) . . (+44) . . Plastic Blaster
- 07:00, 8 July 2014 (diff | hist) . . (+131) . . N File:Nozzle plastic blaster.jpg (A picture of the first prototype. 2.5mm nozzle diameter for wall thickness between 2 and 3mm in one go. 2x 40W heating. Works fine.)
- 07:07, 7 July 2014 (diff | hist) . . (+670) . . N Plastic Blaster (print 2 to 3mm walls in one go.)