Mendel Build Manual/it

From RepRap
Jump to: navigation, search
Mendel Documentation
Mendel Build Documentation



Mendel.jpg

Mendel è la penultima versione di RepRap. However our community of users are always innovating and making it better, and these improvements may be integrated into the stable release over time. Therefore it is somewhat possible that the information within the following pages may, on rare occasions, be unclear. In the event you need additional help, there is an active community in our forums, IRC Channel, and users e-mail list(register) who are always happy to assist. In return for this help, we ask but one thing. The entire Mendel build manual is editable by everyone (as is pretty much every page on the site); all you need to do is Register. Should you run into any issues, please update the wiki to ensure other users don't have the same problems. Now on to the fun stuff:

Ci sono sette fasi principali nella costruzione della Mendel. Sono:

  1. Pianificazione e preparazione per la costruzione
  2. Scaricare ed installare la RepRap sul computer
  3. Costruzione della scheda del circuito
  4. Installazione del firmware del microcontrollore
  5. Costruzione meccanica
  6. Connessioni elettriche
  7. Avvio

If you do each in the order above, you will be able to use what you have done so far to test each new stage. Follow those links to find out how to do each.


For notes on desirable Mendel design improvements and known bugs, please read the Machine_Issues page.