Pages that link to "Template:MOST"
The following pages link to Template:MOST:
View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)- Mechanical testing of polymer components made with the RepRap 3-D printer (transclusion) (← links)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (transclusion) (← links)
- The Effects of PLA Color on Material Properties of 3-D Printed Components (transclusion) (← links)
- Tensile Strength of Commercial Polymer Materials for Fused Filament Fabrication 3-D Printing (transclusion) (← links)
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens (transclusion) (← links)
- Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing (transclusion) (← links)
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products (transclusion) (← links)
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products (transclusion) (← links)
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities (transclusion) (← links)
- Applications of Open Source GMAW-Based Metal 3-D Printing (transclusion) (← links)
- MOST Metal Cura (transclusion) (← links)
- Slicer and process improvements for open-source GMAW-based metal 3-D printing (transclusion) (← links)
- RepRapable Recyclebot: Open source 3-D printable extruder for converting plastic to 3-D printing filament (transclusion) (← links)
- Solar powered recyclebot literature review (transclusion) (← links)
- Improving recyclebot concepts (transclusion) (← links)
- Hot end holder with 3 fans (transclusion) (← links)
- RecycleBot modification - automated feeder (transclusion) (← links)
- Waste plastic extruder: literature review (transclusion) (← links)
- Life cycle analysis of polymer recycling literature review (transclusion) (← links)
- General design procedure for free open-source hardware for scientific equipment (transclusion) (← links)
- Open-source parametric 3-D printed slot die system for thin film semiconductor processing (transclusion) (← links)
- Open-source syringe pump (transclusion) (← links)
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics (transclusion) (← links)
- Free and Open-source Control Software for 3-D Motion and Processing (transclusion) (← links)
- Open Source Lab (transclusion) (← links)
- Building research equipment with free, open-source hardware (transclusion) (← links)
- Open source science (transclusion) (← links)
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components (transclusion) (← links)
- Open Source 3-D Printed Nutating Mixer (transclusion) (← links)
- Open Source Low-Cost Power Monitoring System (transclusion) (← links)
- Open source 3-D printing of OSAT (transclusion) (← links)
- Delta Build Overview:MOST (transclusion) (← links)
- Open-source 3-D Printing in Managing Humanitarian Innovation (transclusion) (← links)
- Open source rapid prototyping of OSAT (transclusion) (← links)
- Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses (transclusion) (← links)
- 3-D Printing Solar Photovoltaic Racking in Developing World (transclusion) (← links)
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers (transclusion) (← links)
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems (transclusion) (← links)
- Global value chains from a 3D printing perspective (transclusion) (← links)
- Open-source metal 3-D printer (transclusion) (← links)
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing (transclusion) (← links)
- MOST open-source metal 3-D printer v2 (transclusion) (← links)
- Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing (transclusion) (← links)
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing (transclusion) (← links)
- Expanding the Consumer Bill of Rights for material ingredients (transclusion) (← links)
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain (transclusion) (← links)
- RepRap Mechanical Testing Literature Review (transclusion) (← links)
- Tensile test protocol: MOST (transclusion) (← links)
- Development and feasibility of applications for the RepRap 3-D printer (transclusion) (← links)
- Life cycle analysis of distributed polymer recycling (transclusion) (← links)
- Solar powered distributed customized manufacturing (transclusion) (← links)
- MOST RepRap Build (transclusion) (← links)
- Applications of RepRap distributed production - literature review (transclusion) (← links)
- Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems (transclusion) (← links)
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing (transclusion) (← links)
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing (transclusion) (← links)
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations (transclusion) (← links)
- Open-source 3D-printable optics equipment (transclusion) (← links)
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties (transclusion) (← links)
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing (transclusion) (← links)
- Wood Furniture Waste-Based Recycled 3-D Printing Filament (transclusion) (← links)
- Modular Design for Spherical Microphone Arrays (transclusion) (← links)
- Prospects of applying 3-D printing to economics of remote communities: Reindeer herder case (transclusion) (← links)
- 3-D printable photovoltaic module spacer (transclusion) (← links)
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger (transclusion) (← links)
- Expanded microchannel heat exchanger (transclusion) (← links)
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype (transclusion) (← links)
- Open source laser system for polymeric welding (transclusion) (← links)
- Laser welding protocol: MOST (transclusion) (← links)
- Open Source Polymer Welder Literature Review (transclusion) (← links)
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing (transclusion) (← links)
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer (transclusion) (← links)
- Expanded microchannel heat exchanger: Non-destructive evaluation (transclusion) (← links)
- Open-Source Automated Mapping Four-Point Probe (transclusion) (← links)
- Emerging Business Models for Open Source Hardware (transclusion) (← links)
- Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware (transclusion) (← links)
- Quantifying the Value of Open Source Hardware Development (transclusion) (← links)
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers (transclusion) (← links)
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market (transclusion) (← links)
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability (transclusion) (← links)
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S. (transclusion) (← links)
- Open Source Laboratory Sample Rotator Mixer and Shaker (transclusion) (← links)
- 3-D printable open source dual axis gimbal system for optoelectronic measurements (transclusion) (← links)
- Democratising design in scientific innovation: application of an open value network to open source hardware design (transclusion) (← links)
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities (transclusion) (← links)
- Thermal properties of 3-D printed polylactic acid-metal composites (transclusion) (← links)
- Franklin Firmware on GigabotHX:MOST (transclusion) (← links)
- Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views (transclusion) (← links)
- Factors effecting real-time optical monitoring of fused filament 3D printing (transclusion) (← links)
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid (transclusion) (← links)
- 3-D printing open-source click-MUAC bands for identification of malnutrition (transclusion) (← links)
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities (transclusion) (← links)
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography (transclusion) (← links)
- Chenlong Nanobeads Project (transclusion) (← links)
- Optimal Design of Thin-film Plasmonic Solar Cells using Differential Evolution Optimization Algorithms (transclusion) (← links)
- MOST quad delta RepRap (transclusion) (← links)
- Building Open Source Hardware in Academia (transclusion) (← links)
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto (transclusion) (← links)
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (transclusion) (← links)
- Polymer recycling codes for distributed manufacturing with 3-D printers (transclusion) (← links)
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom (transclusion) (← links)
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM (transclusion) (← links)
- Category:MOST RepRap build (transclusion) (← links)
- The RepRap 3-D Printer Revolution in STEM Education (transclusion) (← links)
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program (transclusion) (← links)
- Aluminum substrate cleaning for 3-D printing:MOST (transclusion) (← links)
- 3D Metal Printing Slicer Plugin (transclusion) (← links)
- Open-Source Photometric System for Enzymatic Nitrate Quantification (transclusion) (← links)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (transclusion) (← links)
- Open-source nanotechnology: solutions to a modern intellectual property tragedy (transclusion) (← links)
- Open-source mobile water quality testing platform (transclusion) (← links)
- Delta Build Workshop (transclusion) (← links)
- Corn sheller (transclusion) (← links)
- Open-source colorimeter (transclusion) (← links)
- Open-source hardware for research and education (transclusion) (← links)
- Distributed recycling of post-consumer plastic waste in rural areas (transclusion) (← links)
- Category:Open source scientific hardware (transclusion) (← links)
- Franklin:MOST (transclusion) (← links)
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins (transclusion) (← links)
- Open-Source Three-Dimensional Printable Infant Clubfoot Brace (transclusion) (← links)
- Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing (transclusion) (← links)