Keypad
Release status: working
| Description | Upgrade your printer with a keypad
|
| License | GPL
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Description
The keypad is designed by Bart Meijer of Reprapworld.com. It's an advanced keypad that you can hook up to your printer.
Features: - 9-buttons to control your printer: Left, right, up, down, mid, 3 function keys ( F1,F2,F3 ), enter - a rotary encoder - D66 and D65 are broken out - Hooks up easily to your RAMPS AUX-2 port - 41 x 109mm board - Cool black design - screw holes to mount the board
Where to get it
How to build it
Requirements: - 1x Keypad PCB - 9x Tactile switch - 8x 10K resistor - 1x 2x5 Header - Shift register CD74HCT
Insert assembly notes here
How to use it
Hook it up to your RAMPS AUX-2 port. Configure your firmware to use the keypad. Currently no firmware will support it, but here is a Marlin version that has come a long way:
