FoldaRap Batch2
Revision as of 13:47, 2 November 2012 by Emmanuel (talk | contribs) (Created page with 'Category:FoldaRap_Development center Not Ulule this time, but will be certainly made via [http://goteo.org/ GOTEO]. Let's anticipate a little,…')
Not Ulule this time, but will be certainly made via GOTEO.
Let's anticipate a little, 2013 estimation is about 100 machines :)
Contents
Done
Hardware
Electronic
- heatshrink tubing
Custom Parts
Other
In Progress
Hardware
- tweezers
- polymer couplings
- bowden tubing
Electronic
- usb to mini-usb cables
- peltiers
- fans
Custom parts
To Do
Hardware
- direct drive gears
- rolls of kapton
- springs
- bolts, nuts, washers, threaded rods
- belts
- linear bearings
- pulleys, alu plates
- spiral tubes
- aluminium extrusions
- handles
- t-nuts
- pneumatic fittings
- smooth rods, bearings
Electronic
- power supplies
- thermistors
- RepRappro Hotends
- male plugs
- big blue switches
- ferules
- faston ferules
- extruder motors
- female cables
- micro-switch end-stops
- 18,22 and 26 AWG wires (power, heat, sensors)
- wirewound resistors
- Nema 14 motors
- Azteeg_X1, stepper drivers
Custom Parts
- heatsinks
- reprap.org plates
- y-wood-plate
- frame-underplate
- printed parts : leveraging the community printing power, especially for this batch : FoldaRap_Distributed_Manufacturing
Other
- Shipping box for the kits
