All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 19:26, 3 February 2025 VikOlliver (talk | contribs) uploaded File:Mausc magnetic stage 20250204 115923 458.jpg (Maus V0.02 RepRapMicron assembly with magnetic slide mount.)
- 02:34, 2 January 2025 VikOlliver (talk | contribs) uploaded File:Maus drive screw blog 20241114 152656 631.jpg (Detail of drive screw and coupling in standard Maus axis module)
- 02:31, 2 January 2025 VikOlliver (talk | contribs) uploaded File:XY Table blog 20241115 113537 350.jpg (An early RepRapMicron XY Table prototype made from "Metriccano" parts.)
- 00:14, 2 January 2025 VikOlliver (talk | contribs) uploaded File:Block Stage 20241112 174224 597.jpg (Configuration of the RepRapMicron Block Stage. The probe holder is a later addition.)
- 23:41, 1 January 2025 VikOlliver (talk | contribs) uploaded File:Initial Maus Prototype 20241229 153037 518.jpg (The first iteration of the RepRapMicron Maus prototype with drivers and XY Table on a baseboard.)
- 17:31, 8 November 2024 VikOlliver (talk | contribs) uploaded File:IRB 30x30 041024.png (Letters "IRB" On a NZ 10c coin scanned by the "Titch" μRepRap's conductive probe. These are 0.7mm high.)
- 19:43, 26 October 2024 VikOlliver (talk | contribs) uploaded File:First 30x30 50um coin scan 2024-10-26 20-42-43.png (Height map of letter 'A' on a 15x15 grid. Scanned with RepRapMicron and displayed with gluplot)
- 18:57, 26 October 2024 VikOlliver (talk | contribs) uploaded File:Slide contact probe detail 20241027 115426.jpg (Detail of RepRapMicron slide contact probe with header pin.)
- 18:50, 26 October 2024 VikOlliver (talk | contribs) uploaded File:Probe tip header pin.jpeg (Header pin driven into the probe tip wire slot to provide connectivity.)
- 17:22, 26 October 2024 VikOlliver (talk | contribs) uploaded File:Reprapmicron probe stage v1.jpeg (Assembled RepRapMicron stage with probe ground contact. Pictured with NZ 10c coin.)
- 05:53, 26 October 2024 VikOlliver (talk | contribs) uploaded File:Probe hardware connection 20241026 155332 706.jpg (Coin mounted on a glass slide. Not copper coil (centre) to ground the coin. White wire attaches to probe head. These provide "Z Touch" connectivity for the CNC probe software used.)
- 04:18, 26 October 2024 VikOlliver (talk | contribs) uploaded File:Blogged 30x30 50um coin scan 2024-10-26 20-42-43.jpg (Screenshot of microscope video feed with a 3D plot superimposed. The feed shows part of a magnified New Zealand 10c coin, the inset a 3D height map of the visible letter 'A' derived from the probe data.)
- 19:37, 30 April 2024 VikOlliver (talk | contribs) uploaded File:Titch 20240429 183325 345.jpg (The "Titch" prototype based on an OpenFlexure Block Stage)
- 19:29, 30 April 2024 VikOlliver (talk | contribs) uploaded File:400um logo 3rd attempt.jpg (RepRapMicron logo 400μm tall with scale bar. Scratched in Sharpie marker with a hypodermic needle on the "Titch" prototype.)
- 18:16, 4 April 2024 VikOlliver (talk | contribs) uploaded File:Mk2 experimental 20240401 141636 386.jpg (Second experimental platform for μRepRap using indirect lighting stage, robust probe arm, and feet with endstop switches.)
- 00:20, 1 April 2024 VikOlliver (talk | contribs) uploaded File:First square with M3 2024-04-01 14-07-00.jpg (Markings in Sharpie on a microscope slide etched with a 1.0mm square enclosing a 0.5mm square. Lower right shows fragment of M3 screw thread with 0.5mm pitch for scale.)
- 20:12, 12 March 2024 VikOlliver (talk | contribs) uploaded File:2024-03-13-084007 annotated.jpg (Annotated image showing deposition made with a 40μm hypodermic tip.)
- 03:29, 11 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap logo.png (RepRap logo with a micron in the middle)
- 00:24, 7 March 2024 VikOlliver (talk | contribs) uploaded File:URepRap first test rig.jpg (Initial test rig using OpenFlexure Delta stage with a single functional stepper and a wire probe being observed through a microscope.)
- 23:51, 6 March 2024 VikOlliver (talk | contribs) uploaded File:Probe tip and hypodermic.png (Tip of a 24 gauge hypodermic needle (right) and an electrically etched probe top with a tip radius of approximately 0.25µm)
- 05:06, 25 November 2012 VikOlliver (talk | contribs) uploaded File:RepRap Hamilton 2012 Vik Olliver.odp (Summary of RepRap technology for a presentation to teaching staff at Weltec.)
- 20:04, 21 September 2012 VikOlliver (talk | contribs) uploaded File:Rroofl mendel adap.scad (Simple adaptor blocks to attach the Rroofl Z axis to a Mendel or Prusa style frame with.)
- 20:03, 21 September 2012 VikOlliver (talk | contribs) uploaded File:Rroofl mendel prusa adaptor.jpg (Adaptor parts, in dark green, allow a Rroofl Z axis to be put on an existing Mendel or Prusa style frame.)
- 17:09, 21 September 2012 VikOlliver (talk | contribs) uploaded a new version of File:Y bed runners.scad
- 18:44, 18 May 2010 VikOlliver (talk | contribs) uploaded File:20100519 005.jpg (View of simplified XZ interface from above.)
- 18:41, 18 May 2010 VikOlliver (talk | contribs) uploaded File:20100519 004.jpg (View from above, opposite X Motor.)
- 03:07, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100411 004.jpg (Simplified Mendel Z axis components.)
- 00:51, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100406 002.jpg (Tensioning the belt on the simplified Mendel Y axis assembly.)
- 00:46, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100405 004.jpg (Screwing simplified Mendel Y foot onto deposition bed.)
- 00:43, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100405 002.jpg (Adding a washer and Nylok nut to the simplified Mendel Y foot.)
- 00:41, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100405 001.jpg (First stage in assembling a simplified Mendel Y foot.)
- 00:37, 11 April 2010 VikOlliver (talk | contribs) uploaded File:20100405 003.jpg (Unassembled Mendel simplified Y bed with some feet.)
- 06:22, 4 April 2010 VikOlliver (talk | contribs) uploaded a new version of File:Mendel vertex foot.png (Mendel frame vertex with an added foot.)
- 06:20, 4 April 2010 VikOlliver (talk | contribs) uploaded File:Mendel vertex foot.png
- 03:17, 4 April 2010 VikOlliver (talk | contribs) uploaded File:Mendel y foot.jpg (The simplified Y axis foot for the Mendel deposition bed)
- 01:12, 4 April 2010 VikOlliver (talk | contribs) moved page Vik's Mendel X & Y interface Bracket to Vik's Mendel X & Z interface Bracket (Wrong axes in title.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-repraptwo.png (Plot of single Produce layer using a pen instead of extruder.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-reprap first 3D cartesian sml.jpg (First 3D Cartesian reprap axis)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-reprap first 3D cartesian.jpg (First 3D Cartesian reprap axis)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-first extruded recognisablesquare and hexagon sml.jpg (This is the first recognisable extrusion by the RepRap. A square and hexagon.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-first run of x and y deposition sml.jpg (The first run of the X-Y axes with extrusion and java-levelled Z axis.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-first attempt at produce sml.jpg (First crack at Produce test. Hexagon on left, square on right. Y axis underscaled.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-electric screwdriver extruder.jpg (Electric screwdriver used to drive extruder, held with Polymorph)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-dsc02551.jpg (RepRap Logo in Vienna (full size))
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-concrete extrusion body iunder test sml.jpg (The concrete insulator fitted to an extruder under test @107C)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VikOlliver-Mk1 Stage Assembled.jpg (Mk 1 FDM !Stage assembled without limit switches)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VerticalPlatform-spider 2 of.stl (Slotted version of spider. Make 2.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VerticalPlatform-spider rendering.jpg (AoI Rendering of the spider designed to hold the gears)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VerticalPlatform-complete vertical axis smg.jpg (The vertical axis main component assembled.)
- 08:17, 17 March 2010 VikOlliver (talk | contribs) uploaded File:VerticalPlatform-lower spider2.aoi (Second version of the spider used to hold the vertical axis gears)