All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 23:21, 15 November 2012 Dazed.dnc (talk | contribs) uploaded File:D1D2.jpg
- 20:56, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 pressedindemo.jpg (Shows where to put the wood piece )
- 17:01, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 breakoutassembly.jpg (Showing the header pins installed for good measure.)
- 17:00, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 buildmotherboardcable.jpg (Demonstrating how "pin 1" is at the same wire color on both ends)
- 16:59, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 crimp parts.jpg (The collection of parts required to build the endstop plug)
- 16:58, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 endstopconnected.jpg (Correct alignment of the endstop header pins)
- 16:57, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 Installstepper.jpg (How to correctly align the pins on the stepper drivers)
- 16:56, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 motherboardcable.jpg (How to connect the motherboard cable)
- 16:55, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 othercable.jpg (Another pre-built cable type)
- 16:54, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 Pin1.jpg (Showing the recommended wire selection & position)
- 16:53, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 replacechunkyconnector.jpg (Showing what connectors are being discussed)
- 16:52, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 aligned.jpg (Aligning the wire in the crimp before pressing it in)
- 16:51, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 almost inserted.jpg (Showing how to align pin and housing)
- 16:51, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 inserted.jpg (Showing how to assemble the crimp housings)
- 16:50, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 pressed in.jpg (Showing how to crimp pins to wires)
- 16:49, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 pressed in crimp.jpg (Showing how to crimp pins to wires)
- 16:46, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 Stress test.jpg (Demonstration of crimp strength)
- 02:52, 12 March 2011 Dazed.dnc (talk | contribs) uploaded a new version of File:PG3 001.zip (Fixed the schematic.)
- 02:42, 12 March 2011 Dazed.dnc (talk | contribs) uploaded a new version of File:PG3 001.pdf (Corrected misrepresentation of how the DIP switch is wired.)
- 00:37, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 Motor wiring.jpg (Wire bipolar motor coils as shown.)
- 00:33, 12 March 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 Terminal block button.jpg (Just pointing out the button that opens the terminal block connectors.)
- 20:25, 23 January 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 001 footprint.pdf (PG3_001 Stepper Driver Footprint by Dazed.dnc)
- 20:19, 23 January 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 001.zip (PG3_001 Stepper Driver Production Files by Dazed.dnc)
- 20:13, 23 January 2011 Dazed.dnc (talk | contribs) uploaded File:PG3 001.pdf (PG3_001 Stepper Driver Schematic by Dazed.dnc)
- 20:05, 23 January 2011 Dazed.dnc (talk | contribs) uploaded File:Step driver sm.jpg (PG3_001 Stepper Driver by Dazed.dnc)
- 23:33, 16 January 2011 User account Dazed.dnc (talk | contribs) was created