File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 17:28, 14 March 2014 | X carriage.stl (file) |  |
133 KB | Improved X-carriage for Prusa-3 with 4 M3 mounting points. | 1 |
| 17:23, 14 March 2014 | E3d mounting plate.stl (file) | |
16 KB | Mounting plate for E3D hotend. | 1 |
| 17:13, 14 March 2014 | E3d extruder mount.stl (file) | |
97 KB | This is the stl file for the E3D extruder mount described herein. | 1 |
| 16:45, 14 March 2014 | Xcarriage.jpg (file) |  |
141 KB | x-carriage for Prusa i3, modified to support 4 screw binding points to the extruder mount for better stability. | 1 |
| 16:41, 14 March 2014 | Extrudermount.jpg (file) |  |
170 KB | E3D compatible extruder mount, designed to direct air from the fan into a chamber and away from the heated bed, facilitating good adhesion of printed parts to the bed. | 1 |
| 16:29, 14 March 2014 | Finalmount.jpg (file) |  |
342 KB | The E3D hotend mounted on a Tubularbot Prusa i3 type printer, complete with Greg's accessible extruder. | 1 |
| 16:24, 14 March 2014 | E3Dmountback.jpg (file) |  |
161 KB | Image shows the Prusa i3 x-carriage mounted directly to the E3D compatible extruder mount. There are 4 screw holes for M3 screws to secure the two elements together rigidly. | 1 |
| 16:18, 14 March 2014 | E3Dmountbottom.jpg (file) |  |
198 KB | Image showing the correct mounting alignment of the E3D hotend in the extruder mount. | 1 |
| 16:09, 14 March 2014 | E3Dmountfront.jpg (file) |  |
207 KB | Picture showing E3D hotend with an ABS extruder mount and mounting plate. The extruder mount is designed to direct the air from the fan shroud away from the heated bed, thereby improving adhesion of the printed part to the bed. See plenum88 for details. | 1 |
| 14:48, 14 March 2014 | E3Dmount.jpg (file) |  |
156 KB | E3D mounting plate | 1 |
