File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 05:44, 22 April 2011 | WoodenExtruderAssembly.png (file) |  |
98 KB | AlexRa's wooden (mostly) extruder tip assembly for Huxley (TZ) | 1 |
| 14:12, 20 February 2011 | Huxley Grooved Tip.jpg (file) |  |
26 KB | 1 | |
| 13:16, 20 February 2011 | Pushed tip.jpg (file) |  |
25 KB | 1 | |
| 12:41, 20 February 2011 | HuxleyXCarriage180n360apart.jpg (file) |  |
5 KB | Huxley X-carriage with the bronze bushing cut apart | 1 |
| 12:04, 20 February 2011 | Huxley Z Opto Asm.jpg (file) |  |
27 KB | 2 | |
| 07:11, 20 February 2011 | Huxley Z Opto Drawing.png (file) |  |
3 KB | Drawing of the plywood Z-opto holder (not to scale) | 1 |
| 07:05, 20 February 2011 | Z-Opto-Wooden.pdf (file) |  |
7 KB | 2 | |
| 07:01, 20 February 2011 | Z-opto.png (file) |  |
42 KB | Drawing of the plywood Z-opto holder (not to scale) | 1 |
| 06:37, 20 February 2011 | Huxley Z Opto Holder.jpg (file) |  |
58 KB | A plywood holder for mounting the opto to the Z-axis rail. | 1 |
| 18:46, 30 January 2011 | Huxley Opto Y.jpg (file) |  |
46 KB | Y-axis optostop location on a Huxley | 1 |
| 18:24, 30 January 2011 | Huxley Opto X.jpg (file) |  |
44 KB | Huxley: placing the opto on the X axis | 1 |
| 18:08, 30 January 2011 | Huxley X idlers.jpg (file) |  |
45 KB | X-axis belt on Huxley (idler side) | 1 |
| 18:04, 30 January 2011 | Huxley X motor pulleys.jpg (file) |  |
48 KB | X-axis belt on Huxley (motor side) | 1 |
| 17:14, 30 January 2011 | Huxley Y idler pulley.jpg (file) |  |
64 KB | Idler-side Y-axis pulley on Huxley (AlexRa's variant) | 1 |
| 17:13, 30 January 2011 | Huxley Y drive pulleys.jpg (file) |  |
55 KB | Motor-side Y-axis pulleys on Huxley (AlexRa's variant) | 4 |
| 12:27, 26 January 2011 | Huxley board mounting.JPG (file) |  |
93 KB | How to fix the controller board to TechZone's Huxley | 1 |
| 12:03, 26 January 2011 | Bowden with nuts.JPG (file) |  |
63 KB | A good way to fix the Bowden cable when the plastic holder is loose. | 1 |
| 11:39, 26 January 2011 | Bowden pump drilled.JPG (file) |  |
70 KB | How I fixed the mounting plate to the Bowden "pump" on the Huxley. Have to be extra careful with those bolt heads! | 1 |
| 11:25, 26 January 2011 | Bowden pump closeup fixtures.JPG (file) |  |
39 KB | Those thingies I've got in a hardware store, and they work nicely to fix the Bowden "pump" to the Huxley frame (the 6mm bars). You should be able to find something similar, or print out a snap-on plastic equivalent. | 1 |
| 11:13, 26 January 2011 | Bowden pump closeup1.JPG (file) |  |
59 KB | Shows how to fix the Bowden "pump" to the Huxley. The metal parts are not part of the kit, but the result of my raid on a local hardware store. | 1 |
| 10:57, 26 January 2011 | Bowden pump folded.JPG (file) |  |
93 KB | One variant of fixing the extruder "pump" on a Huxley reprap. The extruder is shown is its "folded" position. Swing it out for printing. | 1 |
| 10:26, 26 January 2011 | TechZone tip controller pinout.JPG (file) |  |
125 KB | Pinout of TechZone's tip controller - the one which comes with their Huxley mono-board electronics (well, it's not so mono-board after all!) | 1 |
