File list
This special page shows all uploaded files.
Date | Name | Thumbnail | Size | Description | Versions |
---|---|---|---|---|---|
04:42, 25 January 2016 | PrintrBoard.jpg (file) | 2.72 MB | 1 | ||
04:41, 25 January 2016 | Full hookup.jpg (file) | 1.76 MB | 1 | ||
04:28, 25 January 2016 | Leveling springs.jpg (file) | 2.18 MB | Leveling bed springs | 1 | |
02:03, 12 January 2016 | Heatedbed6.jpg (file) | 8.64 MB | Fully assembled with heated bed | 1 | |
02:01, 12 January 2016 | Heatedbed5.jpg (file) | 7.13 MB | Assembled working surface | 1 | |
01:48, 12 January 2016 | Heatedbed4.jpg (file) | 4.46 MB | mounted heated bed top | 1 | |
01:46, 12 January 2016 | Heatedbed3.jpg (file) | 5.25 MB | Mounted heatbed wiring | 1 | |
01:43, 12 January 2016 | Heatedbed2.jpg (file) | 7.75 MB | cutout for heatbed | 1 | |
01:40, 12 January 2016 | Heatedbed1.jpg (file) | 6.57 MB | Makerbot heatbed wired up | 1 | |
01:58, 11 March 2013 | Work-platform.jpg (file) | 2.43 MB | Work platform initial plan | 1 | |
01:09, 11 March 2013 | Stablizing Y-axis inside.jpg (file) | 4.83 MB | Stabilizing Y-axis inside view | 1 | |
01:09, 11 March 2013 | Stablizing Y-axis.jpg (file) | 6.12 MB | Stabilizing Y-axis rail alignment | 1 | |
01:09, 11 March 2013 | Stablizing Y-axis outside.jpg (file) | 6.57 MB | Stabilizing Y-axis outside view | 1 | |
21:56, 9 March 2013 | New y-axis motor 1.jpg (file) | 4.15 MB | New y-axis motor 1 | 1 | |
21:56, 9 March 2013 | New y-axis motor 2.jpg (file) | 4.27 MB | New y-axis motor 2 | 1 | |
21:56, 9 March 2013 | X-axis motor.jpg (file) | 4.04 MB | Replaced x-axis motor | 1 | |
21:56, 9 March 2013 | Stablizing z-axis.jpg (file) | 2.82 MB | Stabilizing z-axis | 1 | |
21:56, 9 March 2013 | Kapton tape.jpg (file) | 2.84 MB | Kapton tape applied to hot end | 1 | |
04:08, 26 February 2013 | 3d printer001.jpg (file) | 425 KB | Original 3D scanner sketch. | 1 | |
03:39, 26 February 2013 | Extruder mount 3.jpg (file) | 2.05 MB | Extruder_mount_3 | 1 | |
03:39, 26 February 2013 | Extruder bracket.jpg (file) | 1.43 MB | z-axis bracket | 1 | |
03:39, 26 February 2013 | Extruder mount 1.jpg (file) | 5.26 MB | Extruder_mount_1 | 1 | |
03:39, 26 February 2013 | Extruder mount 2.jpg (file) | 2.08 MB | Extruder_mount_2 | 1 | |
03:39, 26 February 2013 | Z-axis bracket001.jpg (file) | 1.9 MB | z-axis bracket sketch | 1 | |
02:36, 20 February 2013 | Z-coupling.jpg (file) | 4.2 MB | z-axis coupling to stepper motor and 3/8" threaded rod. | 1 | |
02:14, 14 February 2013 | Z-axis coupling tap.jpg (file) | 6.51 MB | Tapping threaded coupling for set screw | 1 | |
02:14, 14 February 2013 | Z-axis coupling tension pin.jpg (file) | 7.53 MB | Threading of tension pin into threaded coupling | 1 | |
02:14, 14 February 2013 | Z-axis coupling tension pin 2.jpg (file) | 7.1 MB | Cutting off of tension pin | 1 | |
02:14, 14 February 2013 | Z-axis coupling set screw.jpg (file) | 3.09 MB | Set screw | 1 | |
02:14, 14 February 2013 | Z-axis coupling mounting bracket.jpg (file) | 1.01 MB | Z-axis stepper motor mounting bracket | 1 | |
02:14, 14 February 2013 | Z-axis coupling final assembly1.jpg (file) | 4.03 MB | Final z-axis coupling assembly1 | 1 | |
02:14, 14 February 2013 | Z-axis coupling final assembly2.jpg (file) | 3.52 MB | Final z-axis coupling assembly2 | 1 | |
02:14, 14 February 2013 | Z-axis coupling drill.jpg (file) | 7.07 MB | Drilling threaded coupling for set screw | 1 | |
21:31, 3 February 2013 | Full-printer-with-work-platform.jpg (file) | 7.29 MB | Full assembly with Y-axis complete. | 1 | |
21:20, 3 February 2013 | Final-work-platform.jpg (file) | 5.82 MB | Final Y-axis work platform | 1 | |
21:20, 3 February 2013 | Bottom-work-platform.jpg (file) | 4.6 MB | Bottom of Y-axis work platform | 1 | |
21:20, 3 February 2013 | 3-4inchbase-plate.jpg (file) | 5.09 MB | 3/4 inch mounting base plate | 1 | |
21:20, 3 February 2013 | 3-8inchx35mounting-bolts.jpg (file) | 4.53 MB | 3/8 inch bolts for mounting to Y-axis carriage | 1 | |
21:20, 3 February 2013 | 1-2inch-birch-CARG-compliant-2.jpg (file) | 5.02 MB | 1/2in CARB compliant birch plywood | 1 | |
01:06, 30 January 2013 | Y-axis-web.jpg (file) | 183 KB | Y-axis Stepper | 1 | |
18:23, 29 January 2013 | Z-axis-closeup web.jpg (file) | 377 KB | Z-axis closeup | 1 | |
18:23, 29 January 2013 | Back-complete web.jpg (file) | 303 KB | Back complete | 1 | |
18:23, 29 January 2013 | Front-complete web.jpg (file) | 320 KB | Front complete | 1 | |
18:23, 29 January 2013 | MICROTEK ScanMaker 9600XL open web.jpg (file) | 153 KB | Large format scanner open | 1 | |
18:23, 29 January 2013 | Crude-front-assembly-web.jpg (file) | 213 KB | Crude Assembly Front | 1 | |
18:23, 29 January 2013 | Y-axis-crude-web.jpg (file) | 294 KB | Y-Axis disassembled | 1 | |
18:23, 29 January 2013 | X-axis-crude-web.jpg (file) | 346 KB | X-Axis dissaembled | 1 | |
18:23, 29 January 2013 | X-axis-unipolar-web.jpg (file) | 190 KB | X-Axis unipolar connector | 1 | |
18:23, 29 January 2013 | DSC 8361-web.jpg (file) | 225 KB | X-axis stepper | 1 | |
18:23, 29 January 2013 | Innards-web.jpg (file) | 274 KB | Left over scanner innards | 1 |