User:McNeight

Current Setup

Hardware

Clonedel plastic parts from Metrix Create:Space with SAE / Imperial vitamins, resulting in a near duplicate of an SAE Prusa Mendel with a Wade's Geared Extruder

Electronics

Arduino Mega 2560 attached to a RepRap Arduino Mega Pololu Shield (RAMPS) from UltiMachine. The hot end was purchased as a kit from MakerGear

Firmware

Alternating between the johnnyr branch of Tonokip and the main branch of Teacup Firmware

Software

ReplicatorG 0024 and dev version of repsnapper

Important Measurements

For use with firmware as well as software:

• X & Y axes
  • 8 tooth pulley using XL drive belt
• Z axis
  • 5/16-18 threaded rod
• Extruder
  • 3mm feedstock
  • 0.50 mm nozzle