User:DaveX

Dave is currently building a Wallace.

My Wallace is currently in a partially assembled state with these pieces:

• Wallace, NEMA14/6mm Printed by http://www.fabbr.com/
  • Some (too-small, but shimmed with paper,) PLA LM6UUs per http://www.thingiverse.com/thing:16464
  • 370x300x350mm smooth rods per my notes in Wallace_Build_Manual#Dimensions
  • Pegboard bed: 274x300mm
• Greg's hinged accessible per http://www.thingiverse.com/thing:8252 hobbed with an M5-ish SAE 10-32 tap per my notes at Talk:Wade's_Geared_Extruder#Filing_and_hobbing_the_bolt
• A shorter Wildseyed_Simple_Hot_End, since the air-fitting's locking fin seemed small compared to Wildseyed's pictures, per Talk:Wildseyed_Simple_Hot_End#Air_hose_Adapter_machining
• Pololu_Electronics#Teensy_Breadboard running ATMEGA32U4-ported Teacup
• Old ATX power supply

Things to do:

• Finish the hot end
• Receive some PLA
• Receive some steel LM6UUs
• Connect the Pololu_Electronics#Teensy_Breadboard
  • Add the thermistor circuit
  • Add the heater circuit
  • Adjust my Teacup port to the Teensy http://www.pjrc.com/store/teensy_pins.html for a 100K beta=4036 thermistor.
• Test things.
• Print something.