Talk:MetalicaRap

MetalicaRap Design question feed back / discussion. Add your ideas here!

Design Questions

A. Range of achievable spot sizes at target of a Pierce Electron gun running between 100W to 6KW 150KV  ? ( given cathode is 1.6m from target max deflection 7 degrees )

B. Possible pit falls of running an SEM at 100W in four-source photometric stereo Ruderford back scatter mode ? ( typical SEM power is 0.1W )

Q:. Target metal surface temperature measurement would be a big advantage, Do you know of a electron bombardment based remote temperature measurement approach?

A1: ???

A2: The bombarded surface gets red-hot, right? Is it possible to put an infrared camera inside the chamber -- or an off-the-shelf webcam with its infrared filter removed -- and calibrate it using some test objects in the chamber heated to a known temperature?

Q: Some EBW machines put the workpiece outside the chamber, in open air. What materials are useful as a "window" -- to pass the electron beam, but hold the air out of the vacuum chamber?

---

Other ideas.

.