All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)- 17:46, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Electronics midway.JPG (Another view of the electronics midway through mounting.)
- 17:44, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Electronics board incomplete.JPG (Mid-way through putting the electronics on their board with the power supply.)
- 17:33, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:First printed minimug.JPG (First successful printing on Frank.)
- 17:29, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Xy axis and electronics overview.jpg (Overview of xy-axis and initial electronics mounting.)
- 17:26, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:RepStrap With X-Stage Rails.jpg (Frame with x-axis rails mounted.)
- 17:24, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Yaxis platform guide.JPG (Y-axis platform and guide clamped for drilling.)
- 17:20, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Rail Spacer Detail.jpg (X-axis rails spacer detail.)
- 17:19, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Rail Nut Detail.jpg (X-axis attachment point.)
- 17:11, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Other Stuff 028.jpg (A side view of the frame and axis.)
- 17:06, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Frame Components.jpg (Frame Components.)
- 12:52, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Zaxis slide motor and extruder.JPG (Z-axis slide, stepper, and extruder on the vertical.)
- 12:51, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Initial Stepper Test.JPG (Testing of the Stepper Driver Board v1.1.)
- 12:50, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Frame And XY Axis.JPG (Frame and x/y axis sans electronics and motors.)
- 12:49, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Detail of zaxis slide.JPG (Detail of the z-axis slide on its vertical.)
- 12:49, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Detail of yaxis motor mount.JPG (Detailed view of the y-axis motor mount.)
- 12:48, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Detail of xaxis motor mount.JPG (Detailed view of the x-axis motor mount.)
- 12:47, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Detail back side zaxis slide.JPG (Detailed view of the rear/side of the z-axis slide on its vertical. Held on my permanent magnets to the vertical. Salvaged off of a universal stereo plotter.)
- 12:40, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Clean Frank No Extruder.JPG (Frank before the electronics are all wired together and before the z-axis and extruder are mounted.)
- 12:40, 7 October 2008 Demented Chihuahua (talk | contribs) uploaded File:Initial Finished Frank.JPG (Frank in the initial finished state just before printing his minimug.)
- 01:01, 6 October 2008 SamVilain (talk | contribs) uploaded File:Drexler-arm-1.png (A picture of the Drexler nanorobotic arm. From _Nanosystems: Molecular Machinery, Manufacturing and Computation_, K. Eric Drexler, 1992.)
- 04:23, 5 October 2008 Nophead (talk | contribs) uploaded File:PipeClip.JPG (Otherwise known as a hose clip)
- 17:39, 4 October 2008 Nophead (talk | contribs) uploaded File:GM3Clutch.JPG (GM3 with the clutch visible)
- 17:27, 4 October 2008 Nophead (talk | contribs) uploaded File:12V GM3 Brushes.JPG (12V GM3 showing better brushes and bearings)
- 17:23, 4 October 2008 Nophead (talk | contribs) uploaded File:GM3WornBrushes.JPG (5V GM3 with worn out brushes.)
- 16:30, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsClamp.stl (Simple extruder clamp)
- 16:28, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsWhiteClamp.JPG (HDPE extruder clamp showing self tapping screw.)
- 16:21, 4 October 2008 Nophead (talk | contribs) uploaded File:Green clamp.JPG (Simple extruder clamp)
- 16:09, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsExtruderAlignment.JPG (How to align the filament guide with a drill)
- 16:03, 4 October 2008 Nophead (talk | contribs) uploaded File:Nozzle.png (Nozzle diagram)
- 15:38, 4 October 2008 Nophead (talk | contribs) uploaded File:DieSwellvFlowRate.jpg (Graph of die swell v flow rate for four plastics)
- 15:29, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsTestForFit.JPG (Cross section of extruder nozzle)
- 15:02, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsExtruderCoupler.stl (Direct drive motor coupler)
- 14:55, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsDirectDriveAssembly.JPG (A direct drive extruder assembly)
- 14:46, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsDriveShaft.JPG (M5 drive shaft with soldered nut)
- 14:41, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsDirectDriveCoupler.JPG (A cross between old and new couplers)
- 14:35, 4 October 2008 Nophead (talk | contribs) uploaded File:FringeWheel.stl (An encoder wheel to fit the second shaft of a GM3)
- 14:34, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsEncoderBracket.stl (Shaft encoder bracket)
- 14:16, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsSuppressor.jpg (GM3 Supressor)
- 14:14, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsSupressor.png (Circuit diagram of RFI suppressor)
- 14:10, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsFishPlates.JPG (To captivate the nuts)
- 14:06, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsSprings.JPG (Strong springs)
- 13:41, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsOilyFelt.JPG (An oiled felt washer to)
- 13:28, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsHdpeFilamentGuide.JPG (Filament guide made from HDPE by HydraRaptor)
- 13:14, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsRpExtruderParts.JPG (RP parts for direct drive MK2 extruder)
- 08:10, 4 October 2008 Nophead (talk | contribs) uploaded File:Cerastil heater.JPG (A heater insulated with Cerastil H115)
- 04:55, 4 October 2008 Nophead (talk | contribs) uploaded File:Old-motor-holder.jpg (A picture of the old direct drive motor holder)
- 04:53, 4 October 2008 Nophead (talk | contribs) uploaded File:Old-motor-holder.stl (Direct drive motor holder for original MK2 extruder)
- 03:29, 4 October 2008 Nophead (talk | contribs) uploaded File:NopsExtruder.JPG (The original MK2 extruder plus many minor tweaks)
- 12:42, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Stepper driver overheat glitch.jpg (Here is a the 10mm cube that printed when the Stepper Driver was overheating. As you can see it would miss some step which would mean over time the start point for the next layer would move. )
- 12:33, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Attached memory heat sinks.jpg (Image of a memory heat sinks attached to heat sink that comes with Stepper Board kit)
- 12:30, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Heat sink with thermalPaste.jpg (Image of a heat sink with thermal paste)
- 12:26, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Memory heat sinks single.jpg (Image of a single VGA memory heatsink)
- 12:25, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Memory heat sinks case.jpg (Image of a VGA memory heatsinks)
- 12:21, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Fan attached to heat sink2.jpg (Image of a 40mm computer fan attached to the heat sink of the Stepper Driver board)
- 12:15, 3 October 2008 Ronanwarrior (talk | contribs) uploaded File:Fan attached to heat sink1.jpg (Image of a 40mm computer fan attached to the heat sink of the Stepper Driver board)
- 08:58, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Molex Done.jpg (Socket attached to board)
- 08:57, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Done.jpg (Socket attached to board)
- 08:57, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Assembled.jpg (DIY Molex socket 1)
- 08:56, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Assembled 2.jpg (DIY Molex socket 2)
- 08:56, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Pin soldered.jpg (Completed pin)
- 08:55, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Pin ready to solder.jpg (Pin before soldering)
- 08:55, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Pin cut.jpg (Pin cut down to size)
- 08:54, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Connector cut.jpg (Connector after cutting)
- 08:54, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Connector marked for cutting.jpg (Connector marked for cutting)
- 08:53, 2 October 2008 Peteredworthy (talk | contribs) uploaded File:Original connector.jpg (A pic of a std inline Molex socket)
- 05:47, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Belt tensioner2.png (If you're creative, you can make belt tensioners with anything.)
- 05:41, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:BeltTensioner2.jpg (If you're creative, you can make belt tensioners with anything.)
- 05:41, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:IMAG0081.jpg (If you're creative, you can make belt tensioners with anything.)
- 05:38, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Belt tensioner - small.JPG
- 05:31, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Diagonals3.png (Printable diagonals. Saving a lot of weight for a mobile RepRap.)
- 04:53, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Extruder-ring-4.png
- 04:45, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Extruder-ring-3.png (Fixing the extruder pressure problem.)
- 04:41, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Extruder-ring-2.png (Fixing the extruder pressure problem)
- 04:10, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Extruder-ring.png (Extruder reinforcement by Erik de Bruijn)
- 04:07, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Extruder-ring.jpg
- 03:57, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Optical Rotary Encoder Discs v0.8.svg (Made by Erik with Inkscape)
- 03:55, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Encoder mk2 front-small.png (Made by nophead. Blogged here: http://hydraraptor.blogspot.com/2008/08/shaft-encoder-second-attempt.html)
- 03:53, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Encoder mk2 front.JPG (Nophead made this.)
- 03:47, 2 October 2008 ErikDeBruijn (talk | contribs) uploaded File:Encoders.png (I've made these alternative encoders to be printed on overhead sheets.)
- 18:16, 1 October 2008 Vikolliver (talk | contribs) uploaded File:Modified-corner-assy.jpg (Corner assembly showing washers and CAPA props to stop corners sliding on frame.)
- 18:40, 23 September 2008 Nophead (talk | contribs) uploaded File:ScrewTopPotLid.stl (The lid of the ScrewTopPot)
- 18:33, 23 September 2008 Nophead (talk | contribs) uploaded File:ScrewTopPot.stl (A screw top pot to hold a Fuji FinePix E900 lens adapter.)
- 18:23, 23 September 2008 Nophead (talk | contribs) uploaded File:ScrewTopPotABS.jpg (Screw top pot made in ABS)
- 18:03, 23 September 2008 Nophead (talk | contribs) uploaded File:ScrewTopPotHDPE.JPG (Screw top pot made in HDPE)
- 17:59, 23 September 2008 Nophead (talk | contribs) uploaded File:ScrewTopPotModel.jpg (View of pot in CoCreate)
- 23:56, 18 September 2008 WikiSysop (talk | contribs) deleted page Mediawiki/index.php (content was: 'trractrac' (and the only contributor was '60.191.246.25'))
- 23:55, 18 September 2008 WikiSysop (talk | contribs) blocked 60.191.246.25 (talk) with an expiration time of 1 year (anonymous users only, account creation disabled) (Inserting nonsense/gibberish into pages)
- 02:03, 18 September 2008 WikiSysop (talk | contribs) protected Darwin/AoI ([edit=RepRapDeveloper:move=RepRapDeveloper]) (hist)
- 02:03, 18 September 2008 WikiSysop (talk | contribs) automatically marked revision 347 of page Darwin/AoI patrolled
- 02:01, 18 September 2008 WikiSysop (talk | contribs) automatically marked revision 346 of page Darwin/Laser-Cut patrolled
- 02:01, 18 September 2008 WikiSysop (talk | contribs) protected Darwin/Laser-Cut ([edit=RepRapDeveloper:move=RepRapDeveloper]) (hist)
- 02:01, 18 September 2008 WikiSysop (talk | contribs) automatically marked revision 344 of page Darwin/Thermoplast Extruder patrolled
- 02:01, 18 September 2008 WikiSysop (talk | contribs) protected Darwin/Thermoplast Extruder ([edit=RepRapDeveloper:move=RepRapDeveloper]) (hist)
- 02:00, 18 September 2008 WikiSysop (talk | contribs) changed protection level for Darwin ([edit=RepRapDeveloper:move=RepRapDeveloper]) (hist)
- 02:00, 18 September 2008 WikiSysop (talk | contribs) automatically marked revision 341 of page Darwin patrolled
- 01:59, 18 September 2008 WikiSysop (talk | contribs) automatically marked revision 340 of page Darwin/Cartesian Bot patrolled
- 01:46, 18 September 2008 WikiSysop (talk | contribs) changed group membership for WikiSysop from bureaucrat and administrator to bureaucrat, administrator and RepRapDeveloper
- 01:43, 18 September 2008 Sebastien Bailard (talk | contribs) protected Darwin/Cartesian Bot (Core Documentation [edit=author:move=author]) (hist)
- 01:40, 18 September 2008 WikiSysop (talk | contribs) changed group membership for Degroof from (none) to RepRapDeveloper
- 01:36, 18 September 2008 WikiSysop (talk | contribs) changed group membership for Vikolliver from (none) to RepRapDeveloper