RepRapPro Mendel frame assembly

From RepRap
Revision as of 18:13, 11 March 2012 by Adrianbowyer (talk | contribs) (Created page with '=This page is under construction= {{RepRapPro Mendel Contents}} 400px 400px …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page is under construction

Introduction | Frame assembly | Y axis assembly | X axis assembly | Z axis assembly | Heated bed assembly | Extruder drive assembly | Hot end assembly | Power supply | Wiring | Commissioning | Printing | Multi‑colour/multi‑materials | Colour Printing - Slic3r | Colour Printing - RepRapPro Slicer | Maintenance | Troubleshooting | Improvements

A notice about these instructions!

Since 1st April 2013, the RepRapPro Mendel has been superseded by the RepRapPro Tricolour and Mono Mendel.
If you are building the new machine, use the official, and most up to date, instructions on the RepRapPro wiki here



Reprappro-mendel-frame-finished.jpg


Reprappro-mendel-frame-loose-assembly.jpg


Reprappro-mendel-frame-one-side.jpg


Reprappro-mendel-frame-second-step.jpg


Reprappro-mendel-frame-top.jpg


Reprappro-mendel-spirit-plumb.jpg


Reprappro-mendel-triangle-parts.jpg


Reprappro-mendel-triangles.jpg


Reprappro-mendel-x-bar-ends-parts.jpg


Reprappro-mendel-x-bars-parts.jpg


Reprappro-mendel-x-bars.jpg


Reprappro-mendel-y-and-z-bar-parts.jpg


Reprappro-mendel-y-bars-fitted.jpg


Reprappro-mendel-z-bar-bottom-mount.jpg


Reprappro-mendel-z-motor-mount-detail.jpg

Retrieved from "https://reprap.org/mediawiki/index.php?title=RepRapPro_Mendel_frame_assembly&oldid=55709"