RP9
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: prototype
| Description | Simple cost effective RepStrap
|
| License | unknown
|
| Author | |
| Contributors | |
| Based-on | |
| Categories | |
| CAD Models | |
| External Link |
Overview
This RepStrap is an attempt to create a simple cost effective design
Design Objectives
- 5 ply 6 mm plywood construction
- 8 mm steel for linerar motion
- 200 mm x 200 mm x 200 mm build area
- Spectra fishing line drive
- Fabricate mechanical hardware in less than 2 hours
- Completely Open Source
- Minimal part count
Current Status
Development of a CNC router/mill cut version is in progress.
| Plywood parts | ||||||
|---|---|---|---|---|---|---|
| Description | Quantity | |||||
| Side frame | 2 | |||||
| Top brace | 2 | |||||
| Bottom brace | 2 | |||||
| Table | 1 | |||||
| Top motor mount | 2 | |||||
| Bottom motor mount | 1 | |||||
| Extruder mount | 1 | |||||
| Total | 11 | |||||
