Prusa i3 Rework CNC Assembly
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Introduction | Bill of materials | Y-axis assembly | X-axis assembly | Connecting X-axis and Z-axis | Motor assembly
X and Y-axis motions | Heated bed assembly | Extruder assembly | Electronics and wiring | Marlin Firmware
Prusa i3 Rework CNC Milling Addition
The development of a CNC Milling Addition to the Prusa i3 can be made out of any material with a tensile strength great enough to provide clamping force on a Dremel Flex Shaft Attachment or any spindle motor. The aim was to keep weight on the X Axis as minimal as possible and to attempt to reduce vibrations transmitted to the Prusa i3 RW.
Table of contents
- [[Prusa i3 Rework CNC Assembly BOM|CNC BOM]
- Assembly
Under Development As Of 3/10/14
This is currently in development and can be found @ thing:264104
