Prusa i3 Build Manual

From RepRap
Revision as of 08:22, 13 January 2013 by JBFromOZ (talk | contribs) (→‎Single Sheet Frame Style)
Jump to: navigation, search

English •  العربية •  български •  català •  čeština •  Deutsch •  Ελληνικά •  español •  فارسی •  français •  hrvatski •  magyar •  italiano •  română •  日本語 •  한국어 •  lietuvių •  Nederlands •  norsk •  polski •  português •  русский •  Türkçe •  українська •  中文（中国大陆）‎ •  中文（台灣）‎ •  עברית •  azərbaycanca • 


Prusa i3 Documentation

Boxed style Frame Style

In the future this page might contain a tutorial until then a tutorial for the boxed frame style prusa i3 by Kliment: http://78.47.92.212/i3_documentation_pics/

http://koti.kapsi.fi/~kliment/photos/i3/ http://koti.kapsi.fi/~kliment/photos/prusa3/

Single Sheet Frame Style

There is no tutorial for the Single Sheet Frame style Prusa i3 however the X axis, X cariage and Y frame and bed are mostly the same.

rod lengths are listed here http://titanpad.com/bU77NESnMC

Instructions on the github say to RP each part in the single-plate folder.

z-axis-top.scad x 1 z-axis-bottom.scad x 1

Retrieved from "https://reprap.org/mediawiki/index.php?title=Prusa_i3_Build_Manual&oldid=77844"