PortaPrusa Build Manual
Revision as of 16:55, 16 May 2014 by Cubedparadox (talk | contribs) (Created page with "This is my personal build log ==Still To Be Printed Parts== The [https://github.com/cubedparadox/PortaPrusa/tree/master/STLs Repo] for the PortaPrusa contains all of the STLs...")
This is my personal build log
Still To Be Printed Parts
The Repo for the PortaPrusa contains all of the STLs you need in order to make the printer. In addition, it also contains the source blend files.
The following is a list of what still needs to be printed:
| Quantity | STL file | Comments | Picture |
|---|---|---|---|
| 2 | Z-Top.stl | 
| |
| 1 | Z-Bottom-Large.stl | Allows clearance for X-axis motor | 
|
| 1 | Z-Bottom-Small.stl | 
| |
| 1 | X-Big.stl | Holds Motor | 
|
| 1 | X-Small.stl | 
| |
| 1 | Extruder-Main-2.stl | 
| |
| 1 | Extruder-Arm.stl | 
| |
| 1 | Extruder-Plug.stl | Retaining plug for bearing | 
|
| 1 | Extruder-Clamp.stl | Clamps Belt | 
|
| 3 | M8-Mount.stl | Retaining block for m8 rod | 
|
| 1 | M8-Mount-Limit.stl | Contains mount for endstop | 
|
| 4 | M4-Mount.stl | Retaining block for m4 rod | 
|
| 1 | Y-Motor.stl | 
| |
| 1 | Y-Idle.stl | 
| |
| 2 | Bed-Slide.stl | 
| |
| 1 | Bed-BeltMount.stl | Top piece of belt clamp | 
|
| 2 | Bed-Clamp.stl | 
| |
| 2 | Box-Pivot.stl | 
| |
| 1 | Endstop-Mount.stl | 
| |
| 2 | Drive-Gear.stl | 
| |
| 2 | Idle-Gear.stl | 
|
Done
| Quantity | STL file | Comments | Picture |
|---|---|---|---|
| 2 | Z-Top.stl |
| |
| 1 | Z-Bottom-Large.stl | Allows clearance for X-axis motor |
|
| 1 | Z-Bottom-Small.stl |
| |
| 1 | X-Big.stl | Holds Motor |
|
| 1 | X-Small.stl |
| |
| 1 | Extruder-Main-2.stl |
| |
| 1 | Extruder-Arm.stl |
| |
| 1 | Extruder-Plug.stl | Retaining plug for bearing |
|
| 1 | Extruder-Clamp.stl | Clamps Belt |
|
| 3 | M8-Mount.stl | Retaining block for m8 rod |
|
| 1 | M8-Mount-Limit.stl | Contains mount for endstop |
|
| 4 | M4-Mount.stl | Retaining block for m4 rod |
|
| 1 | Y-Motor.stl |
| |
| 1 | Y-Idle.stl |
| |
| 2 | Bed-Slide.stl |
| |
| 1 | Bed-BeltMount.stl | Top piece of belt clamp |
|
| 2 | Bed-Clamp.stl |
| |
| 2 | Box-Pivot.stl |
| |
| 1 | Endstop-Mount.stl |
| |
| 2 | Drive-Gear.stl |
| |
| 2 | Idle-Gear.stl |
|
