PonokoRepRapXAxisAssembly

Ponoko RepRap X Axis Assembly

Assemble the pieces vertically as shown. This makes it easier to keep bits that should stay out of the way out of the way:

• Complete & fitted X Axis Assembly:
  

This shows how to fit the Y Saddles onto the Y axis. Make sure both sets of Y saddles are square before you do up the nuts connecting them to the End Spacers, their bearing face resting neatly on the Y axis slide rails.

The green stuff in the left of the photo is a reflection from a Darwin Paste Extruder fitted into the Extruder Socket.

Now you can construct the X Motor Assembly.

Back to the "Ponoko" RepRap index page

-- Main.VikOlliver - 25 Oct 2008