P2f

YesRap_P2F is a completely new 3D printer, based on Prusa i3, MendelMax, Ultimaker, Open Rail, etc. Thanks all of them!

Brief

P2F is a 3D printer designed by YesRap in China. The completely redesigned main frame is constructed using laser cut plywood. The linear bearing system, based on Open Rail and MakerSlide, is also completely redesigned using laser cut steel plates, bent and mounted on plywood frame. The expected initial release is March 2013.

Main Improvements

1. Easy and fast assembly ------ in 5 hours for new users
2. Light weight -------- 6.5kg, so lower shipping fee
3. No smooth rods ------- no need of lubricant grease
4. High speed ----------- travel = 300mm/s print = 200mm/s
5. Low noise-------------  ??db

Main Parts

1. Sanguinololu 1.3A + USB or Bluetooth
2. DC Power Supply 350W 12V 29A
3. BudaschNozzle V1.1
4. Borosilicate Glass

Parts List

1. Frame wood parts

1*FrameY,1*FrameZ,2*Frame_Side,2*Frame_Bottom,1*Frame_Top

1. Frame Steel parts

FrameX,

1. Frame Aluminum Parts

Motor Y mounter, 6*OpenRail

1. extruder
2. hotend
3. Building bed

Links

[1] A video showing the printer printing using ABS.