Mondrian Build Manual
|
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文（中国大陆） • 中文（台灣） • עברית • azərbaycanca • |
Mondrian Documentation
Assembling and setting up the machine should take between 4h to 8h or two afternoons :)
Contents
Base frame
Z-axis
Z-sliders
Z-drive
check that everything still run smoothly, without effort or backlash, then lock the extrusion and the associated pulley
the threaded rod is locked by an M5 nut (missing on the picture) and the pulley, from each side of the MR105 bearing
