Mondrian Build Manual

From RepRap
Revision as of 13:17, 30 October 2014 by Emmanuel (talk | contribs) (→‎Base frame)
Jump to: navigation, search

English •  العربية •  български •  català •  čeština •  Deutsch •  Ελληνικά •  español •  فارسی •  français •  hrvatski •  magyar •  italiano •  română •  日本語 •  한국어 •  lietuvių •  Nederlands •  norsk •  polski •  português •  русский •  Türkçe •  українська •  中文（中国大陆）‎ •  中文（台灣）‎ •  עברית •  azərbaycanca • 


Mondrian Documentation

Assembling and setting up the machine should take between 4h to 8h or two afternoons :) If you preassemble everything, or if you disassemble your machine for a travel, it should take 1h to put it back together.

<videoflash>QuMhb-vMsfw</videoflash>

Know the parts

Firstly, have a look at all the part and learn what everything is.

  • base corner

  • top corner

  • top corner (at the rear left, you can embed a raspberryPi pcb webcam in it)

Base frame

Mondrian2 base-corner.png x4 base-corner

20x20 300mm.jpg x4 300mm profile M4x8 round-head.jpg x4 m4x8 T-nut.jpg x4 m4 t-nut

  • Base-frame 0.png
  • Base-frame 1.png

Base-frame 2.png x4 base corner assembly Mondrian2 bottom-plate.png x1 bottom-plate

M4x8 round-head.jpg x4 m4x8 T-nut.jpg x4 m4 t-nut

  • Base-frame 3.png

  • don't lock the nut firmly for the moment

  • Base-frame 5.png
  • Base-frame 6.png

  • press the sides and check that every corner is square, lock the 4 corners

Z-axis

Z-sliders

Z-drive

Bed

Top Frame

Y-axis

Panels

X-axis

Wiring

Calibration

Retrieved from "https://reprap.org/mediawiki/index.php?title=Mondrian_Build_Manual&oldid=134847"