Isaac/Sources

Master Assembly

Media:Isaac-2010-04-14: 2010-04-14 snapshot (Alibre 11.2).

• Recolored to improve build instructions.
• Finished end-stops
• Updated mounting holes
• Bill-Of-Material (BOM) Ready

File:Isaac-2010-04-10.stp: 2010-04-10 snapshot (Alibre 11.2). Nearly finished. Todo (probably on 04-11):

• Finish end-stop and flag placement
  • Update end-stop mounting holes to match shipped parts
• Add circuit boards (thick sheets)
• Check screws, nuts, washers, etc. to prepare for hardware count

X Carriage with Mark IV extruder

File:Isaac-x-carriage-with-mk4-2010-04-10.stp: 2010-04-10 snapshot (Alibre 11.2). This is the X carriage assembly with the Mark IV adapter plate and the Mark IV extruder.

• Caution: you may need to decrease the size of the big washer that supports the hot assembly. This washer and the supporting bolts must not touch any of Isaac's parts!