Electronics Variations
Revision as of 12:35, 3 October 2008 by Ronanwarrior (talk | contribs) (Added images for heat sinks/fan attchaed to stepper board. Also fixed some typos)
Part substitutions:
Additions:
- For overheating problems
- Use thermal paste in between the heat sinks on all the electronics, normally found at computer part stores
- Add Small computer memory heat sinks to the heat sink on the Stepper Driver board
- Add 40mm fans near/top of the heat sinks on the Stepper Driver board
- Use thermal paste in between the heat sinks on all the electronics, normally found at computer part stores
Mounting location:
- You can build a small box out of acrylic or wood and mount all the electronic boards in side of it. Then You can add several computer fans to the box to help the Integrated Circuits remain cool. This has several benefits.
- Help solve overheating problems.
- Help prevent short circuits.
- Stop children/pets from messing with electronics
- It looks nicer than a bunch of electronics just jumbled on a table
- You can also mount them on a sheet of wood.
