DarwinConceptImprovements
Revision as of 15:55, 3 September 2007 by VikOlliver (talk | contribs) (version migrated from twiki)
Darwin Concept Improvements
If you spot any things which are particularly awkward, have any ideas on a more efficient approach, or see any wasted opportunity please list your comments here. These notes will be a very useful resource to design of the second release.
Author | Area | Note |
eD | XY table | Head position off centre of the X axis means more dead space |
eD | Z axis | Lots of dead space here, due to motor position. However, potential use for dead space: build material reel space. |
eD | Bracket holes | Dimension the utility holes (e.g. on carriage) to fit standard belt brackets |
eD/Vik | Bolts | Replace M3's with standard M5's? |
eD | Motor couplings | Standardise? Y coupling most efficient |
Zach/eD | Bolts | Magic (single) bolt length would be cool |
Vik | Extruder board mount | It fouls V1.2 board edge connectors |
Vik | Opto bracket | A bit more of a gap for the opto's legs wouldn't hurt
|
-- Main.EdSells - 05 May 2007