Circuit board construction
If you buy the printed circuit boards for Mendel ready-made from MakerBot Industries you will get versions intended for their CupCake machine. These can be used as they stand, but by making a few small changes to them (pliers, small screwdriver, and soldering iron are all that are needed) you can make the Mendel wiring a lot neater. Details of how to do these PCB adaptions for Mendel are here.
If you get kit boards you can build them for Mendel from the start, of course. Here are the instructions for building the boards yourself. One Mendel will need:
- 1 RepRap Motherboard (mendel/electronics/motherboard),
- 1 Mendel USB and power connector (no Eagle design - it's a simple piece of stripboard),
- 3 RepRap Stepper drivers (mendel/electronics/stepper-motor-driver),
- 3 RepRap Opto Endstops (mendel/electronics/opto-endstop), and
- As many RepRap extruder controllers as you have extruders (mendel/electronics/extruder-controller).
Back to How to make RepRap Version II Mendel.