Prusa i3 Rework Introduction
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Introduction | Bill of materials | Y-axis assembly | X-axis assembly | Connecting X-axis and Z-axis | Motor assembly
X and Y-axis motions | Heated bed assembly | Extruder assembly | Electronics and wiring | Marlin Firmware
Release status: working
Description | Prusa Mendel Iteration 3 rework based on the EiNSTeiN VARIANT.
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Contents
Introduction
The purpose of this document is o provide a visual guide needed to build a Prusa Mendel i3 3D Printer.
The machine and the assembly instructions are licensing by GPL. Files are available here :
- STL files available on Thingiverse and Github.
Prusa Mendel i3 presentation
Prusa Mendel i3 is the third version of the open source 3D printer Prusa Mendel. Our version is based on an aluminium frame cut by water jet cutter and threaded rods. Axis motion are made on linear bearings, belts and pulleys or threaded rods and NEMA 17 motors.
Table of contents
- Introduction
- Bill of materials
- Y-axis assembly
- X-axis assembly
- Connecting X-axis and Z-axis
- Motor assembly
- X and Y-axis motions
- Heated bed assembly
- Extruder assembly
- Electronics and wiring
Improvements
- Extruder upgrade: Magma Hotend (by Trinity Lab) support.
- New cooling fan duct for Magma Hotend.
- Y Idler with a tensioner system.
- X End Idler with endstop holder.
- Upgrade X End Idler in order to support 624 bearing.
- Y Motor with endstop holder.
- Addition of Z endstop Holder in situ.
Sources
- Prusa Mendel i3 EiNSTeiN VARIANT on Reprap.org
- Modified extruder designed by ch1t0 on Thingiverse
Help and support
You can contact us with the following websites : eMotion Tech ou Reprap-France.com par le biais de la rubrique Contact.