All public logs
Combined display of all available logs of RepRap. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoCornerAssembly-dsc04402.jpg (Washer into Lower Corner Assembly.)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoCornerAssembly-dsc04401.jpg (Attaching 8mm part to Lower Corner Assembly)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoCornerAssembly-dsc04400.jpg (First 4 screws inserted into lower corner)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoCornerAssembly-dsc04262.jpg (Set of parts for Ponoko corner bracket)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoCornerAssembly-dsc04257.jpg (Corner bracket with lasercut bearing race installed)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04559.jpg (Finished tensioned chain.)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04558.jpg (One way of holding chain together for soldering)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04557.jpg (Chain face filed flat, ready to tin)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04552.jpg (Filing the face flat - do not saw it.)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04551.jpg (Making the chain slack)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04550.jpg (Locating where to cut chain)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04548.jpg (Tools to grip and cut chain with)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04547.jpg (Anchoring bed with M3 screws)
- 07:20, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04546.jpg (Bits to anchor bed to Z Axis.)
- 07:19, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04544.jpg (Deposition Bed forxed to Frame)
- 07:19, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04543.jpg (Screw fixed to Bed Frame)
- 07:19, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PonokoBedChainFitting-dsc04542.jpg (Parts for attching the Bed to the Frame)
- 07:18, 17 March 2010 VikOlliver (talk | contribs) uploaded File:PlywoodRepRaps-ponoko take 2.tgz (Second attempt at lasercutting a RepRap via Ponoko.com)
- 07:10, 17 March 2010 VikOlliver (talk | contribs) uploaded File:MendelUnderDevelopment-bar-lengths-mendel.ods (Spreadsheet and image showing bar lengths)
- 07:07, 17 March 2010 VikOlliver (talk | contribs) uploaded File:MeasuringThermistorBeta-ThermistorBeta.ods (OpenDocument Spreadsheet for calculating thermistor Beta and Rz)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-nozzle on half finished extruder.jpg (Nozzle fitted to a half-finished extruder barrel.)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-nozzle after thread removal.jpg (Nozzle in progress. Excess thread removed.)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-final nozzle sanded.jpg (0.5mm Nozzle after shaping and sanding)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-detatchable nozzle assy sml.jpg (The detatchable nozzle concept. This one has been reduced in diameter with solder around a piece of nichrome wire, which is then removed to leave the vital hole.)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-cut bolt innut unsoldered.jpg (Drilled and cut bolt in M6 nut showing exit hole)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-cut bolt in nut soldered.jpg (Cut and drilled bolt soldered into place.)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-crudel shaped nozzle.jpg (Crudely shaped 0.5mm nozzle)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-bud shaped dremel bit.jpg (Dremel bit used to shape interior of nozzle)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-M6 bolt with 3mm hole.jpg (3mm hole drilled in M6 bolt.)
- 07:00, 17 March 2010 VikOlliver (talk | contribs) uploaded File:InterchangeableNozzleMk2-M6 bolt centred.jpg (M6 Bolt with a pilot hole in the centre)
- 06:58, 17 March 2010 VikOlliver (talk | contribs) uploaded File:HighTemperatureMaterials-first concrete insulator.jpg (The first concrete insulator just out of its mould.)
- 06:58, 17 March 2010 VikOlliver (talk | contribs) uploaded File:HandmadeGears-mould and hole saw sml.jpg (Small image of mould and hole saw)
- 06:58, 17 March 2010 VikOlliver (talk | contribs) uploaded File:HandmadeGears-dsc03015.jpg (Mould and hole saw)
- 06:58, 17 March 2010 VikOlliver (talk | contribs) uploaded File:Half-roundWasherBearing-stacking half-washers.jpg (Stacking half-washers in the bearing well)
- 06:57, 17 March 2010 VikOlliver (talk | contribs) uploaded File:Half-roundWasherBearing-stack of half-washers.jpg (Completed stack of half-washers)
- 06:57, 17 March 2010 VikOlliver (talk | contribs) uploaded File:Half-roundWasherBearing-half-washer bearings installed.jpg (Half-washer bearings installed in the extruder.)
- 06:57, 17 March 2010 VikOlliver (talk | contribs) uploaded File:Gputils-gputils 0.13.4-1a i386.deb (Our build of gputils)
- 06:54, 17 March 2010 VikOlliver (talk | contribs) uploaded File:GearDesignInAoI-set cog smoothness.png (Setting the smoothness of the cog teeth)
- 06:54, 17 March 2010 VikOlliver (talk | contribs) uploaded File:GearDesignInAoI-aoi cog window.png (The AoI Cog creation dialogue)
- 06:45, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DocumentationMain-Beyond The Pixel.odp (Beyond The Pixel - 2D & 3D CAD for eejits)
- 06:45, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DocumentationMain-Arduino in 4D.odp (LCA2010 Arduino Evolution Presentation)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-corner-bracket-degroof-vik.stl (STL of strengthened corner bracket. Vik has AOI file.)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-toothed-pulley-rim-1.1.stl (Z-toothed-pulley-rim thickened for printing on RepRap)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-idler.stl (Idler wheel for Z belt tensioner)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-idler.aoi (Idler wheel for Z belt tensioner)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-idler-case.stl (Holder for Z belt tensioner pulley)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-idler-case.aoi (Holder for Z belt tensioner pulley)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-anchor-bracket.stl (Anchoring bracket for Z belt tensioner assy)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Z-belt-tensioner-anchor-bracket.aoi (Anchoring bracket for Z belt tensioner assy)
- 06:39, 17 March 2010 VikOlliver (talk | contribs) uploaded File:DarwinPartDevelopment-Y-opto-flag 1.1.stl (Y Opto flag with teared bolt hole.)