Prusa i3 Build Manual
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Boxed style Frame Style
In the future this page might contain a tutorial until then a tutorial for the boxed frame style prusa i3 by Kliment: http://78.47.92.212/i3_documentation_pics/
http://koti.kapsi.fi/~kliment/photos/i3/ http://koti.kapsi.fi/~kliment/photos/prusa3/
Single Sheet Frame Style
There is no tutorial for the Single Sheet Frame style Prusa i3 however the X axis, X cariage and Y frame and bed are mostly the same.
JBFromOZ - preparing to build an aluminium frame prusa i3.
rod lengths are listed here http://titanpad.com/bU77NESnMC
Instructions on the github say to RP each part in the single-plate folder. some items need more than 1 copy. It is not yet 100% clear which extruder to use, I am planning to use a MGS extruder with a Nema17 stepper
Description | Qty | Image |
RP Parts | ||
z-axis-top.scad | 1 | |
z-axis-bottom.scad | 1 | |
y-motor.scad | 1 | |
y-idler.scad | 1 | |
y-corners.scad | 4 | |
bushing.scad (in box-frame folder) | 1 (set of 3) | |
y-belt-holder.scad | 1 | |
x-end-motor.scad | 1 | |
x-carriage.scad | 1 | |
magnetic-holder.scad | 1 | |
fan-mount.scad | 2 | |
belt-guide.scad | 4 | |
dual-extruder.scad | 1 (???) | |
compact-extruder.scad | 1 (???) | |
MGS Extruder Kit available at reprapsource | ||
MGS branch of i3 single-frame parts bySound: i3-unterwelt at https://github.com/alexrj/Prusa3/tree/i3-unterwelt | ||
mgs-body.stl | 1 | |
mgs-groovemount_ABS.stl | 1 | |
mgs-idler.stl | 1 | |
mgs-mount.stl | 1 | |
x-carriage.stl | 1 | |
Aluminium 6mm plate 370mm x 370mm | ||
Prusa3ALU-FREZOVANY-v4.dxf | 1 |
BOM
NEMA17 steppers x 5
J-Head MkV x 1
GT2 pulleys x 2
GT2 belts x 2
clear tubing (z coupling) x 2
Z drives M5 (length) x 2