User:DaveX
Dave is currently building a Wallace.
My Wallace is currently in a partially assembled state with these pieces:
- Wallace, NEMA14/6mm Printed by http://www.fabbr.com/
- Some (too-small, but shimmed with paper,) PLA LM6UUs per http://www.thingiverse.com/thing:16464
- Too short 370x165x350mm smooth rods per my notes in Wallace_Build_Manual#Dimensions
- Greg's hinged accessible per http://www.thingiverse.com/thing:8252 hobbed with an M5-ish SAE 10-32 tap per my notes at Talk:Wade's_Geared_Extruder#Filing_and_hobbing_the_bolt
- A shorter Wildseyed_Simple_Hot_End, since the air-fitting's locking fin seemed small compared to Wildseyed's pictures, per Talk:Wildseyed_Simple_Hot_End#Air_hose_Adapter_machining
- Pololu_Electronics#Teensy_Breadboard running ATMEGA32U4-ported Teacup
- Old ATX power supply
Things to do:
- Finish the hot end
- Receive some PLA
- Receive some steel LM6UUs
- Get an extra 6mm smooth bar to expand my stub Y axis
- Build a bed
- Connect the Pololu_Electronics#Teensy_Breadboard
- Add the thermistor circuit
- Add the heater circuit
- Adjust my Teacup port to the Teensy http://www.pjrc.com/store/teensy_pins.html for a 100K beta=4036 thermistor.
- Test things.
- Print something.