Basic Starter Working Configurations
So you have built your 3D printer... Now there are very many configurations due to the diversity of the RepRap Project.
Here is a a list of some basic Known to be working confgigurations collect from RepRapers using their 3D printers.
So make this as usefull as possible we need to define a standard method to define the basic configuration.
Each configuration has a Electronic hardware description the phisical definition of your 3D printer is not coverd by this description.
____________________________________________________________________________________
Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ Gen3 RepRap Motherboards
Stepper controllers any combination of the stepper controllers.
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Windows
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________
RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mecanism.
Host OS ~ Linux
Motherboard for Firmware ~ RAMPS
Hostware Link Firmware link
____________________________________________________________________________________