Basic Starter Working Configurations

From RepRap
Jump to: navigation, search
You might also want to look at Category:Working Configuration. Perhaps some or all of that page should be merged into this page. (Discuss)

So you have built your 3D printer... Now there are very many configurations due to the diversity of the RepRap Project.

Here is a list of some basic Known to be working configurations collect from RepRappers using their 3D printers.

So make this as useful as possible we need to define a standard method to define the basic configuration.

Each configuration below specifies working combinations of electronics and software. The mechanical aspects of the machine (i.e. Darwin, Mendle, etc) are omitted.

____________________________________________________________________________________

RepSnapper Basic Windows Configuration Mendel RAMPS 3D printer mechanism.

Host OS ~ Windows 7 64bits

Motherboard for Firmware ~ Ultimachine Ramps 1.1 Ramps

Software http://svn.kulitorum.com/RepSnapper/MSVC9/Release/RepSnapper.exe

Firmware https://github.com/johnnyr/Tonokip-Firmware (BaudRate: 115200, Special Conf: Inverse Opto)

Full Package http://www.gamefront.com/files/20188808/RepRap-Tonokip-Repsnapper.zip (+ config file)

____________________________________________________________________________________


Repsnapper Windows Configuration Mendel RAMPS 3D printer mechanism.

Host OS ~ Windows 7 64bits

Motherboard for Firmware ~ Ultimachine Ramps 1.1 Ramps

Software http://www.kulitorum.com/RepSnapperBeta.rar

Firmware https://github.com/kliment/Klimentkip (BaudRate: 115200, Special Conf: Inverse Opto => configuration.h line 128 : const bool ENDSTOPS_INVERTING = true)

____________________________________________________________________________________


Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________


Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards with Extruder controler

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________


Repsnapper Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________


Repsnapper Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________


ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

ReplicatorG Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________


ReplicatorG Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________


RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________


RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ Gen3 RepRap Motherboards

Stepper controllers any combination of the stepper controllers.

Hostware Link Firmware link

____________________________________________________________________________________

RepRapHost Basic Windows Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Windows

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________


RepRapHost Basic Linux Configuration Any RepRap / Repstrap 3D printer mechanism.

Host OS ~ Linux

Motherboard for Firmware ~ RAMPS

Hostware Link Firmware link

____________________________________________________________________________________Media:Example.ogg