BEEF
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: Experimental
Description | Back-plane Experimental Electronics Framework
|
License | unknown
|
Author | |
Contributors | |
Based-on | [Eurocard]
|
Categories | Development Electronics
|
CAD Models | Kicad
|
External Link |
Contents
Introduction
Please find attached the basic schematic and notes for the breakout and prototyping cards.
Actual board designs to follow as I do them.
Please find attached the single sided board layout for the breakout board. Not this is intended for one or a mix of:-
Soldering Ribbon Cable Headers to. Soldering wire/cable direct to. Soldering Screw Terminals withe a 0.1" or 2.54mm pitch to.
So you can connect other cards etc to the backplane without the need for a dedicated card. This should let you use legacy RRRF boards with the backplane model.
Quick Start Files
For those less interested in the devlopment but more in using the designs. These files are a quick way to get started using the results of the BEEF development work.
The Electronic Experimenters Back-plane
A simple plug-in break out board
Complete Source Tree & Libraries
To Be Arranged
These Files are Mirrored
These files are mirrored in: http://dev.forums.reprap.org/read.php?13,33975 and the Official Repository along with the Library. This is part of the Hall of Mirrors Problem and the Other Spaces Problem. Yes, this is a Library problem, which we will have to figure out.