User contributions
- 02:50, 4 November 2017 (diff | hist) . . (-22) . . Teacup Firmware (→Kinematics: new defines for kinematics) (current)
- 03:10, 6 January 2017 (diff | hist) . . (0) . . m Step rates/de (→Durch Schrittrate erreichbare Verfahrgeschwindigkeiten)
- 17:22, 8 November 2016 (diff | hist) . . (+96) . . Step rates (Add Nucleo F411RE)
- 17:20, 8 November 2016 (diff | hist) . . (+802) . . Step rates (A little bit history for this section)
- 17:09, 8 November 2016 (diff | hist) . . (-95) . . Step rates (Undo: This is SINGLE stepping frequency. Some lines below is the quad step frequency!)
- 10:19, 13 September 2016 (diff | hist) . . (0) . . Teacup Firmware (fixed on 1.6.10 - only file in a folder "src" will also compile)
- 13:20, 23 June 2016 (diff | hist) . . (-1) . . Teacup Firmware (→Toolchain for ARM)
- 12:25, 23 June 2016 (diff | hist) . . (-1) . . Teacup Firmware (ppa is moved. There is no ppa from Terry Guo anymore.)
- 12:58, 23 October 2015 (diff | hist) . . (-6) . . Teacup Firmware (→Porting steps)
- 12:58, 23 October 2015 (diff | hist) . . (-18) . . Teacup Firmware (the arm part is in the master)
- 03:50, 28 September 2015 (diff | hist) . . (+3) . . Step rates (There is no standard-mode in Marlin. Quadstepping is the standard and the stepping-rates are limited to 10kHz.)
- 03:49, 28 September 2015 (diff | hist) . . (-2) . . Step rates/de (Es gibt keinen 'Standard'-Modus bei Marlin. Repetier wird auch immer im Quadstepping betrieben. Von daher sind die erreichbaren Schrittraten weniger.)
- 03:43, 28 September 2015 (diff | hist) . . (+101) . . Step rates (→By step rate achievable feedrates)
- 03:38, 28 September 2015 (diff | hist) . . (+19) . . Step rates (40kHz quadstepping with Marlin. Anything else is just theoretical stuff without any features (endstops etc.))
- 03:32, 28 September 2015 (diff | hist) . . (-36) . . Step rates/de (Bei 40kHz ist Marlin begrenzt. Schneller geht es nicht wirklich.)
- 18:05, 31 July 2015 (diff | hist) . . (+22) . . Triffid Hunter's Calibration Guide/de (less thing***se)
- 16:54, 31 July 2015 (diff | hist) . . (-38) . . Triffid Hunter's Calibration Guide/de (remove thing****e-link)
- 16:52, 31 July 2015 (diff | hist) . . (0) . . File:Calibration stairs.zip (Wurstnase uploaded a new version of "File:Calibration stairs.zip": STL now included) (current)
- 16:49, 31 July 2015 (diff | hist) . . (+39) . . N File:Calibration stairs.zip (Simple scad-file for a calibration part)
- 13:25, 19 June 2015 (diff | hist) . . (+21) . . Step rates (→Achievable step rates)
- 13:24, 19 June 2015 (diff | hist) . . (-43) . . Step rates/de (→Erreichbare Schrittraten)
- 03:00, 20 May 2015 (diff | hist) . . (-31) . . m User talk:Wurstnase (→Schrittraten) (current)
- 03:00, 20 May 2015 (diff | hist) . . (+198) . . User talk:Wurstnase
- 02:53, 20 May 2015 (diff | hist) . . (+182) . . Step rates/de (→Erreichbare Schrittraten)
- 06:37, 12 May 2015 (diff | hist) . . (+1) . . Triffid Hunter's Calibration Guide (→Measure)
- 06:36, 12 May 2015 (diff | hist) . . (+1) . . Triffid Hunter's Calibration Guide/de (→Messung)
- 08:00, 4 January 2015 (diff | hist) . . (+40) . . Step rates/de (→Erreichbare Schrittraten)
- 09:58, 2 January 2015 (diff | hist) . . (-452) . . Triffid Hunter's Calibration Guide/de (→Vorwort)
- 09:53, 2 January 2015 (diff | hist) . . (-4) . . m Triffid Hunter's Calibration Guide/de (→E Steps Fine Tuning/Extruder Feineinstellung - DE)
- 09:53, 2 January 2015 (diff | hist) . . (-4) . . m Triffid Hunter's Calibration Guide/de (→Hotend Temperatur - DE)
- 09:53, 2 January 2015 (diff | hist) . . (-4) . . m Triffid Hunter's Calibration Guide/de (→Slicer Einstellungen - DE)
- 09:53, 2 January 2015 (diff | hist) . . (-4) . . m Triffid Hunter's Calibration Guide/de (→E steps/Extruder Schritte - DE)
- 12:51, 28 November 2014 (diff | hist) . . (+5) . . m Triffid Hunter's Calibration Guide/de (→Hotend Temperatur)
- 12:50, 28 November 2014 (diff | hist) . . (-80) . . m Triffid Hunter's Calibration Guide/de (→Hotend Temperatur)
- 12:50, 28 November 2014 (diff | hist) . . (+216) . . Triffid Hunter's Calibration Guide/de (Temperatur für die Düse übersetzt)
- 12:37, 28 November 2014 (diff | hist) . . (+5) . . m Triffid Hunter's Calibration Guide/de (→Slicer Einstellungen)
- 06:40, 25 November 2014 (diff | hist) . . (-6) . . m Triffid Hunter's Calibration Guide/de (Links repariert)
- 09:35, 21 November 2014 (diff | hist) . . (+8) . . m Triffid Hunter's Calibration Guide/de (→E Steps Fine Tuning/Extruder Feineinstellung - DE)
- 09:34, 21 November 2014 (diff | hist) . . (-1) . . Triffid Hunter's Calibration Guide/de (Link eingefügt)
- 09:33, 21 November 2014 (diff | hist) . . (0) . . m Triffid Hunter's Calibration Guide/de (→E Steps Fine Tuning/Extruder Feineinstellung - DE)
- 09:33, 21 November 2014 (diff | hist) . . (+368) . . Triffid Hunter's Calibration Guide/de (Übersetzung Extruder fertig)
- 09:18, 21 November 2014 (diff | hist) . . (+3) . . m Triffid Hunter's Calibration Guide/de (→Layer Höhe, Extrusion Breite)
- 04:26, 21 November 2014 (diff | hist) . . (0) . . Triffid Hunter's Calibration Guide/de (→Layer Höhe, Extrusion Breite)
- 04:26, 21 November 2014 (diff | hist) . . (+873) . . Triffid Hunter's Calibration Guide/de (Slicer-Einstellung übersetzt und erweitert; Feintuning angefangen)
- 07:02, 20 November 2014 (diff | hist) . . (+177) . . Triffid Hunter's Calibration Guide/de (Berechnung übersetzt; erster Teil von Messung übersetzt)
- 11:12, 17 November 2014 (diff | hist) . . (+1) . . Triffid Hunter's Calibration Guide/de (→E steps/Extruder Schritte - DE)
- 11:11, 17 November 2014 (diff | hist) . . (+4) . . Triffid Hunter's Calibration Guide/de (→Vorwort)
- 11:10, 17 November 2014 (diff | hist) . . (+166) . . Triffid Hunter's Calibration Guide/de (→Vorwort)
- 11:08, 17 November 2014 (diff | hist) . . (+18,001) . . N Triffid Hunter's Calibration Guide/de (Created page with "{{Languages}} ==Vorwort== Dies ist ein erster Versuch den kompletten Guide von Triffid ins Deutsche zu übersetzen. Ich werde nur sporadisch Zeit dazu finden aber ich Versuch...")