Wood-D
This page is a development stub. Please enhance this page by adding information, cad files, nice big images, and well structured data!
Release status: experimental
| Description | Just another wooden 3D-Delta-Printer (Open Source Project)
|
| License | GPL
|
| Author | |
| Contributors | |
| Based-on | [[]]
|
| Categories | |
| CAD Models | CorelDraw / PDF
|
| External Link |
Contents
Description
Wood-D - Just another wooden 3D-Delta-Printer (Open Source Project)
Wood-D is a 3D-Delta-Printer based on LASER-cutted plywood. The joints are made of bearing balls and neodyn ring magnets.
Design Objectives
Specifications
| Principle | Delta / Rostock | |
| Construction | LASER cutted plywood 4mm (400x300mm, 5 pieces) | |
| Printing area | 180x180mm or circle 210mm | fits Heated Bed |
| Printing height | 200mm (typical) | depends on linear system lenght |
| Dimension base box | 337x296x60mm | |
| Dimension top box | 337x296x20mm | |
| Dimension printer | 337x296x650mm | depends on linear system lenght |
| Joints | Magnetic | |
| Drive | Stepper motors with timing belt |
Features
Parts
Base and Top Box
Linear System
Timing Belt
Joints
Extruder
Heated Bed
The base box is designed to hold a standard PCB Heated Bed
Electronics
Beta 1: Arduino Mega 2560 with RAMPS 1.4 shield and Marlin firmware
The electronic is in mounted a 'drawer' to easily adapt to other designs like Megatronics
Downloads
After the first beta phase the construction drawings and LASER cut files are going online. Please wait...
Current Status
Beta 1:
| Part | Status | Comment |
|---|---|---|
| Base and top box | ready | minor bugs to fix |
| Linear system | ready and working | |
| Joints | ready and working | |
| Timing belt | at work... |
Links
More infos on the blog page wood-d.de (German language)
