Delta
Release status: unknown
Description | Delta type parallel kinematic manipulator setup to be used as repstrap
|
License | |
Author | |
Contributors | |
Based-on | [[]]
|
Categories | |
CAD Models | |
External Link |
Contents
Working Notes!
This RepRap/RepStrap is a teamup of User:Energetic and User:Reinoud.
As for the design, its still a work in progress although the manipulator gets more mature; its second prototype is approaching build phase. As for the firmware, a ReplicatorG compatible firmware has been written doing the coordinate transformations needed. It can either run on a single Arduino or on a single Sanguino with standard Polulu stepper controllers and standard Nema17 steppers.
Forum and mailing list
http://dev.forums.reprap.org/list.php?177
Existing Designs
"Mjcbruin" from the Netherlands designed the this delta bot for $70. It is driven by 3 hobby servos, and is controlled by an Arduino. The code has been published at the letsmakerobots link. Video Design + code
Reinoud has built a similar design with servos.
Text
This is a generic Widgit Banger! I made it because it's cool but I use it to make Widgits. Share and Enjoy!
Photos and Drawings
- Error creating thumbnail: File with dimensions greater than 12.5 MP
Links can be put in captions.
Working Notes
Project Lead(s): tbd
Forum thread?
http://dev.forums.reprap.org/ ?
http://forums.reprap.org/read.php?178,26318
Files
[Image:DeltaRepRap_Assy_View.png] : tbd
Tooling
Lasercutter and standard tools are sufficient to make the repstrap version