Valentia
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Release status: working
Description | Valentia is a Case-Rap variant by David Sanz Kirbis
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Description
Valentia is a design by David Sanz Kirbis (aka. Dasaki) based in jlguisl's foldable [Case-Rap]. The name "Valentia" is taken from the name (Valentia Edetanorum) the original roman founders gave, in 138 BC, to the city in Spain where I'm living now: Valencia. Current stable pre-release is v0.3.
Specifications
v0.3 | |
---|---|
Plastic Parts (exc. Extruder) | todo |
Non Printed Parts (approx.) | todo |
Cost (USD) | todo |
Controller Electronics | todo |
Printing Size (mm) | 200 x 200 x 160 |
Motors | 4 x NEMA 14, 1 x NEMA 17 Stepper |
Frame Material | 10mm Plywood |
Frame Manufacture | Basic Woodwork Tools |
Size (WxLxH) | Open:40x50x44cm Closed: 40x10x48cm |
Weight | 5Kg |
Introduction
jlguils' design was released under GNU / GPL license (as it is based in the design of the Mendel90, also GNU / GLP ), so I'm publishing my own variant under the same GNU GENERAL PUBLIC LICENSE Version 3.
From the original design only the general division / parts of the wooden structure is kept, but all measures changed and parts are custom designs to suit two of the goals: low volume and low weight.
Documentation of current stable versión v0.3 is ongoing, but sources (Sketchup Make file and configured Marlin firmware) are pre-released on the project's github.
Here you got some pictures: