Pages that link to "File:In order to center the motor instead of the hotend I had to invert the x-end-motor orientation and thus we are back to the two motor on the same side, but maybe the mass will not be such a problem (or compensated by the centered extruder)"

← File:In order to center the motor instead of the hotend I had to invert the x-end-motor orientation and thus we are back to the two motor on the same side, but maybe the mass will not be such a problem (or compensated by the centered extruder)

Jump to: navigation, search

Filters Hide transclusions | Hide links | Hide redirects | Hide file links

The following pages link to File:In order to center the motor instead of the hotend I had to invert the x-end-motor orientation and thus we are back to the two motor on the same side, but maybe the mass will not be such a problem (or compensated by the centered extruder):

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

VertX (file link) ‎ (← links)

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

Retrieved from "https://reprap.org/wiki/Special:WhatLinksHere/File:In_order_to_center_the_motor_instead_of_the_hotend_I_had_to_invert_the_x-end-motor_orientation_and_thus_we_are_back_to_the_two_motor_on_the_same_side,_but_maybe_the_mass_will_not_be_such_a_problem_(or_compensated_by_the_centered_extruder)"