User:RobertKuhlmann/RepRap Morgan BOM

Under construcution

This article is the extended version of a material list for the RepRap Morgan.

Please feel free to add missing parts or correct mistakes.

Thanks to Quentin Harley for his permission to do this and for his outstanding Morgan-project.

Printed parts

You find the original SCAD-file from Quentin Harley, that does all parts, over here: Original Morgan SCAD-file

I've redrawn some of the parts to ease modifications without scripting.

01-pvc_pipe_support_a

Socket for PVC-pipe with cable hole

Drawing: 01-pvc_pipe_support_a.pdf

Source (Inventor): 01-pvc_pipe_support_a.ipt

STL-file: 01-pvc_pipe_support_a.stl

Amount needed: 2

02-pvc_pipe_support_b

Socket for PVC-pipe

Drawing: 02-pvc_pipe_support_b.pdf

STL-file: 02-pvc_pipe_support_b.stl

Source (Inventor): 02-pvc_pipe_support_b.ipt

Amount needed: 2

03-z_mount_bottom_8mm

Z-axis base for 8mm axes

Drawing: 03-z_mount_bottom_8mm.pdf

STL-file: 03-z_mount_bottom_8mm.stl

Source (Inventor): 03-z_mount_bottom_8mm.ipt

Amount needed: 1

04-z_mount_top_8mm

Z-Achsenbasis oben für 8mm Achse

Drawing: []

Source (Inventor): []

Amount needed: 1

05-motormount_short

Kurze Motorhalterung

Drawing: []

Source (Inventor): []

Amount needed: 1

06-motormount_tall

Lange Motorhalterung

Drawing: []

Source (Inventor): []

Amount needed: 1

07-drivewheel_rod

Antriebsrad für Stange

Drawing: []

Source (Inventor): []

Amount needed: 1

08-drivewheel_tube

Antriebsrad für Rohr

Drawing: []

Source (Inventor): []

Amount needed: 1

09-22mm_6805_bearing_adaptor

Adapter 6805er-Lager auf 22mm

Drawing: []

Source (Inventor): []

Amount needed: 1

10-bed_arm_left_8mm

Plattformarm links für 8mm Achse

Drawing: []

Source (Inventor): []

Amount needed: 1

11-bed_arm_right_8mm

Plattformarm rechts für 8mm Achse

Drawing: []

Source (Inventor): []

Amount needed: 1

12-bed_z_mount_bracket

Plattformträger Z-Achse

Drawing: []

Source (Inventor): []

Amount needed: 1

13-bed_rear_mountclips

Plattformträger rückwärtige Befestigungs-Clips

Drawing: []

Source (Inventor): []

Amount needed: 2

15mm pipe holders – To be done

15mm-Rohrhalter (muss noch konstruiert werden)

Drawing: []

Source (Inventor): []

Amount needed: 2

14-bed_front_mountclips.stl

Plattformträger vordere Befestigungs-Clips

Drawing: []

Source (Inventor): []

Amount needed: 2

15-hall_endstop_holder

Hall-Sensor-Halter

Drawing: []

Source (Inventor): []

Amount needed: 3

16-leadscrew_shaft_motor_mount

Motoranschluss für Gewindestange

Drawing: []

Source (Inventor): []

Amount needed: 1

17-Morgan_arm_PSI_a

Morgan-Arm PSI mit Kabeldurchführung

Drawing: []

Source (Inventor): []

Amount needed: 1

18-Morgan_arm_PSI_b

Morgan-Arm PSI mit Kabeldurchführung

Drawing: []

Source (Inventor): []

Amount needed: 1

19-Morgan_arm_Theta_a

Morgan-Arm Theta (Innenachse)

Drawing: []

Source (Inventor): []

Amount needed: 1

20-Morgan_arm_Theta_b

Morgen-Arm Theta (Außenachse)

Drawing: []

Source (Inventor): []

Amount needed: 1

21-Morgan_toolhead

Drawing: []

Source (Inventor): []

Amount needed: 1

21-Morgan_toolhead_V3 (alternative)

Base for the V3 bowden hotend from RepRap-Fab.org.

Drawing: 21-Morgan_toolhead_V3.pdf

Source (Inventor): 21-Morgan_toolhead_V3.ipt

STL-file: 21-Morgan_toolhead_V3.stl

Amount needed: 1

22-Leadscrew-nut_Alpen8mmSDS

Gewindestangenmutter Alpen 8mmSDS

Drawing: []

Source (Inventor): []

Amount needed: 1

23-extruder_bowden_adaptor

Bowden-Adapter (Seilzugadapter) für den Extruder

Drawing: []

Source (Inventor): []

Amount needed: 1

Cap_2

Endkappe (8mm Loch, 16mm Gewinde)

Drawing: []

Source (Inventor): []

Amount needed: 2

Eckstruder_Big_Gear_Herringbone

Großes Fischgrätgetriebezahnrad für den Extruder

Drawing: []

Source (Inventor): []

Amount needed: 1

Eckstruder_Block_for_Prusa

Prusa-Extruderblock

Drawing: []

Source (Inventor): []

Amount needed: 1

Eckstruder_Idler_Block_for_Prusa

Prusa-Zwischenrad-Block

Drawing: []

Source (Inventor): []

Amount needed: 1

Eckstruder_Small_Gear_Herrinbone

Kleines Fischgrätgetriebezahnrad für den Extruder

Drawing: []

Source (Inventor): []

Amount needed: 1

thumb_knob_M4_extruder

Noppenmutter M4 für den Extruder

Drawing: []

Source (Inventor): []

Amount needed: 1

TighteningCone_2

Konische Befestigungsklemme

Drawing: []

Source (Inventor): []

Amount needed: 2

Hardware

M3 nut

M3 grub screw 6mm (or suitable replacement bolt

M4 nut

M4 bolt 40mm

M4 bolt 80mm

M8 nut

M8 washer

M8 spring washer

M8 washer 28mm

M8 Nylock Nut

M8 Bolt 40mm

M8 Bolt 100mm

M8 Bolt 60mm

2mm self tapping coach screws, 40mm

15mm brass pipe 440mm

15mm brass pipe 200mm

22mm brass pipe 460mm

8mm threaded rod 650mm

8mm smooth rod

hard spring (idler compression) 7mm

8mm soft spring (lead screw anti backlash)

cabinet coach screws, 5mm