Tripodmaker

Tripodmaker

Release status: unknown

Description	End of life documentation
License	None
Author	User:Pj.vandendriessche
Contributors
Based-on	None
Categories	None
CAD Models
External Link

As of December 31st 2017 - Tripodmaker ended their production and support.

All support documentation can be found here.

Manual Tripodmaker Classic

• File:01-00f-tripodmaker-manual

Manual Tripodmaker Black Edition

• File:Tripodmaker Black Edition User Manual slides new firmware

Cura installation info for slicing

• File:Cura set-up for Tripodmaker

Additional Windows software:

• File:Setuprepetierhosttripodmaker 1 0 6

• File:Printrun

Additional Mac OS X soft ware:

• File:Printrun

Netfab for mac:

• File:Netfabb studio basic for mac

Components to print

• File:Door knob and black edition v2 print head cover

Trouble shooting

• File:Cable Connectivity check – in case you have trouble with the USB connection of your printer.

• File:Cold zone inside Heat break is clogged – this is the method for unclogging your nozzle

• File:Cold pull – use this method for removing debris from your nozzle.

• File:Door mounting – how to mount the door

• File:Extruder drive cleaning – how to clean the extruder drive after grinding – do this once very 50 hours of printing

• File:Logging your Tripodmaker – In case you have issue’s and we need info

• File:Heater block and thermistor – Hot end repair info

• File:Screen issue – In case your screen or button is not working

• File:Screen replacement – In case we need to replace your screen

• File:Thermistor replacement – In case your nozzle temperature read-out is wrong or fluctuations are too high.