Timgo Tip-Hot End
Revision as of 22:44, 19 November 2012 by Timgo (talk | contribs) (Created page with 'Timgo Tip - Hot End Concept (untested) hot end using: NiChome heating wire; JB weld (or similar high temp compound); and threaded rod. File:Timgo Tip.jpg Proposed Build st…')
Timgo Tip - Hot End
Concept (untested) hot end using: NiChome heating wire; JB weld (or similar high temp compound); and threaded rod.
Proposed Build steps:
1. Start with strait peace of raw plastic filament
2. Sharpen with pencil sharpener
3. Drill metal washer to intended size
4. Place washer on tip
5. Rap heating wire around filament
6. JB weld and add threaded rod
Variation 1-untested - addition of thermistor
Variation 2-untested – addition of air cooling holes to threaded rod
Reference builds:
http://reprap.org/wiki/Buckrap_Hot_End_Bow
http://reprap.org/wiki/Electroformed_Nozzle
http://reprap.org/wiki/Glass_Nozzle