Talk:Mendel parts more info

From RepRap
Revision as of 19:39, 7 December 2009 by Jkeegan (talk | contribs) (New page: ~~~~ - This might be covered elsewhere, but it might be worth listing the required dimensions of each part (max length, width, height, in the default orientation of the piece), for those p...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Jkeegan 23:39, 7 December 2009 (UTC) - This might be covered elsewhere, but it might be worth listing the required dimensions of each part (max length, width, height, in the default orientation of the piece), for those people printing on different size beds. For example, do all of these pieces print on the 4x4 print area of a MakerBot Cupcake in their original orientations, or in any orientation at all? For instance, I tried printing the x-carriage-lower_1off.par file on a MakerBot that I'm using as a RepStrap and it didn't seem to fit on the 4"x4" bed (at least not in its initial orientation, which seemed to have the right side of the following picture on the bottom).. That part is shown in the middle here:

Carriage-printed-parts.PNG

URL: http://objects.reprap.org/mediawiki/images/1/19/Carriage-printed-parts.PNG

but not in the main list below. Are the models changing?

Retrieved from "https://reprap.org/mediawiki/index.php?title=Talk:Mendel_parts_more_info&oldid=4100"