Talk:Heated Bed Theory
Heated Bed Theory comments
Hello,
As I was working on a new bed design I noticed a small discrepancy between the board shown in the picture and the math behind it.
I based myself on the equations included on the entry when I found this out:
This is based on the equations available on the page, more specifically, <math>n_tr= \frac{W_b}{W_tr+W_i} \\ \\</math>
When using this formula I ended up having n horizontal tracks+ 1 residual vertical track (I tested this by programmatically generating my tracks in eagle) as opposed to exactly n tracks; In order to solve this I had to change the formula to the following: <math>n_tr= \frac{W_b}{W_tr+W_i} +1</math>
The reasoning behind it came from working it from the Wb side when I as trying to figure out why I was having this issue:
<math>\\ \\ W_b=n_tr(W_tr+W_i)-(W_tr+W_i) \\ W_b=(n_tr-1)(W_tr+W_i) \\ \frac{W_b}{W_tr+W_i}=n_tr-1 \\ \frac{W_b}{W_tr+W_i}+1=n_tr \\ \\</math>
Best Regards,