File list
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 17:00, 21 November 2014 | P3Steel frame base back.jpg (file) |  |
359 KB | P3Steel back foot, installed. | 1 |
| 16:57, 21 November 2014 | P3Steel frame base front.jpg (file) |  |
263 KB | P3Steel front feet. | 1 |
| 08:47, 19 November 2014 | P3Steel-tools screws nuts 1a.jpg (file) |  |
426 KB | M3 hex keys (a.k.a. Allen keys, Allen wrenches, hex wrenches), M3 12mm bolts, M3 nyloc nuts. All that is required to assemble the P3Steel frame! | 1 |
| 16:32, 28 October 2014 | P3Steel small m3 thumbwheels 1.jpg (file) |  |
732 KB | Small, low profile m3 thumbwheels here fitted with niloc nuts. | 1 |
| 14:51, 26 October 2014 | P3Steel frame assembled 2.jpg (file) |  |
454 KB | All the steel parts fit perfectly together, thanks to the highly accurate laser cutting process. | 1 |
| 14:38, 26 October 2014 | P3Steel frame assembled 1.jpg (file) |  |
841 KB | Most of the steel parts can be assembled in less than 30 minutes. | 1 |
| 14:32, 26 October 2014 | P3Steel frame parts ready 1.jpg (file) |  |
503 KB | All the steel parts have been painted and the paint is now dry. We are ready to start the assembly of a new P3Steel! | 1 |
| 04:46, 25 October 2014 | ATX PSU bequiet 2.jpg (file) |  |
797 KB | Power ratings of the be quiet! ATX PSU. | 1 |
| 04:38, 25 October 2014 | ATX PSU bequiet 1.jpg (file) |  |
472 KB | A be quiet! ATX PSU from their value line. | 1 |
| 04:29, 25 October 2014 | ATX PSU meter 1.jpg (file) |  |
580 KB | Autorange digital multimeter with 20A DC measuring capability. | 1 |
| 04:21, 25 October 2014 | ATX PSU block 1.jpg (file) |  |
511 KB | 12 position terminal block strip and correct size screwdriver. | 1 |
| 01:28, 25 October 2014 | ATX PSU gauge 2.jpg (file) |  |
473 KB | 20AWG wire. | 1 |
| 01:28, 25 October 2014 | ATX PSU gauge 1.jpg (file) |  |
374 KB | 18AWG wire. | 1 |
| 20:54, 24 October 2014 | ATX PSU cutting sense 2.jpg (file) |  |
361 KB | The 3.3V_Sense lead and a 3.3V lead soldered together and insulated with heatshrink tubing. | 1 |
| 20:45, 24 October 2014 | ATX PSU cutting sense 1.jpg (file) |  |
810 KB | The 3.3V_Sense lead and a 3.3V lead which we are going to solder together. | 1 |
| 05:07, 24 October 2014 | P3Steel painted parts 1.jpg (file) |  |
776 KB | After many days, all the P3Steel frame parts are painted. I gave up on yellow and used dark blue for some parts. | 1 |
| 21:29, 23 October 2014 | ATX PSU innards 4.jpg (file) |  |
559 KB | More cable to cut or keep! | 1 |
| 21:20, 23 October 2014 | ATX PSU innards 2.jpg (file) |  |
521 KB | Another view of the innards of our ATX PSU, with the PFC coil connector and the fan connector disconnected. | 1 |
| 21:00, 23 October 2014 | ATX PSU innards 3.jpg (file) |  |
974 KB | Shows some of the wires we are going to cut. | 1 |
| 20:47, 23 October 2014 | ATX PSU cutting 4.jpg (file) |  |
447 KB | We also cut away all the cables to the main motherboard connector. | 1 |
| 17:02, 23 October 2014 | ATX PSU cutting 3.jpg (file) |  |
588 KB | We keep the cabling we cut out for later. | 1 |
| 16:54, 23 October 2014 | ATX PSU cutting 2.jpg (file) |  |
453 KB | We also cut away the motherboard 12V CPU connector. | 1 |
| 16:41, 23 October 2014 | ATX PSU cutting 1.jpg (file) |  |
688 KB | Cables should be cut right at the PCB level. | 1 |
| 13:04, 23 October 2014 | ATX PSU tools 1.jpg (file) |  |
602 KB | Pliers and screwdrivers generally needed to modify ax ATX PSU. | 1 |
| 10:00, 23 October 2014 | ATX PSU pry open 1.jpg (file) |  |
618 KB | Gently push apart the two case halves with a flat screwdriver. | 1 |
| 09:54, 23 October 2014 | ATX PSU screws removed 1.jpg (file) |  |
839 KB | We now have removed the four screws, but the case still won't come apart! | 1 |
| 16:39, 22 October 2014 | ATX PSU innards 1.jpg (file) |  |
685 KB | The guts of our ATX PSU. | 1 |
| 16:14, 22 October 2014 | ATX PSU screws 1.jpg (file) |  |
597 KB | The screws holding together the ATX PSU case. | 1 |
| 08:06, 22 October 2014 | LEDstripPSU 1.jpg (file) |  |
39 KB | An example of a cheap LED strip PSU - not recommended for RepRap use. | 1 |
| 23:53, 21 October 2014 | ATX PSU ready 1.jpg (file) |  |
914 KB | Our ATX PSU is now ready to be connected to our RepRap electronics. | 1 |
| 22:14, 21 October 2014 | ATX PSU test 1.jpg (file) |  |
620 KB | No load test of an ATX PSU. | 1 |
| 20:59, 21 October 2014 | ATX PSU braids 3.jpg (file) |  |
550 KB | Braided cables: no tangles of loose wires! | 1 |
| 20:58, 21 October 2014 | ATX PSU braids 2.jpg (file) |  |
694 KB | Braided cables (various styles) of an ATX PSU. | 1 |
| 20:58, 21 October 2014 | ATX PSU braids 1.jpg (file) |  |
594 KB | Braided cables of an ATX PSU. | 1 |
| 16:55, 20 October 2014 | ATX PSU switch 1.jpg (file) |  |
614 KB | The back of the ATX PSU with a proper O/Off switch. | 1 |
| 16:46, 20 October 2014 | ATX PSU cables 1.jpg (file) |  |
828 KB | The cables are not sleeved, and 200-240V AC input only. | 1 |
| 15:14, 20 October 2014 | ATX PSU box back 1.jpg (file) |  |
538 KB | The back of the box listing the technical specifications and features for this ATX PSU. | 1 |
| 15:07, 20 October 2014 | ATX PSU out of box 1.jpg (file) |  |
846 KB | Just the ATX PSU out of its box. | 1 |
| 14:56, 20 October 2014 | ATX PSU label 1.jpg (file) |  |
531 KB | Almost every ATX PSU has a label on the side with its power ratings. | 1 |
| 14:44, 20 October 2014 | ATX PSU open box 1.jpg (file) |  |
843 KB | Box contents: the PSU in bubble wrap, power cable, small plastic bag with four screws and... no manual! | 1 |
| 14:30, 20 October 2014 | ATX PSU in the box 1.jpg (file) |  |
565 KB | An ATX PSU for my RepRap project, in its box, still with the shrink wrap. | 1 |
| 07:43, 13 October 2014 | P3Steel-painting6a.jpg (file) |  |
548 KB | Yellow requires two coats, as the first coat by itself does not result in uniform coverage. | 1 |
| 07:34, 13 October 2014 | P3Steel-painting5b.jpg (file) |  |
862 KB | After sanding the steel frame parts, rub with a sponge in warm water with detergent and rinse abundantly, then dry with a rag. | 1 |
| 21:21, 12 October 2014 | M3 thumbwls.jpg (file) |  |
734 KB | Low profile bed leveling M3 thumbwheels for P3Steel | 1 |
| 20:47, 12 October 2014 | P3Steel-electronics1b.jpg (file) |  |
668 KB | Arduino + RAMPS 1.4 combination as used in the P3Steel. | 1 |
| 20:12, 12 October 2014 | P3Steel-1a.jpg (file) |  |
389 KB | P3Steel and Arduino + RAMPS 1.4 electronics and wiring | 1 |
| 19:06, 12 October 2014 | P3Steel-painting4a.jpg (file) |  |
768 KB | 1 | |
| 18:59, 12 October 2014 | P3Steel-painting3a.jpg (file) |  |
708 KB | Inexpensive universal acrylic paint used to paint the P3Steel frame parts. | 1 |
| 18:51, 12 October 2014 | P3Steel-painting2a.jpg (file) |  |
878 KB | The P3Steel laser-cut parts need to be sanded before painting. | 1 |
| 18:38, 12 October 2014 | P3Steel-painting1a.jpg (file) |  |
646 KB | Shows a barb on a laser-cut steel part for the P3Steel. | 1 |
