Smartrap Build Manual screenshot repetier config
Revision as of 05:21, 14 November 2014 by Smartfriendz (talk | contribs)
This is a simple page with screenshot of repetier and slic3r configs for the smartrap with jheadlite hotend.
For another hotend, the nozzle size and fan coolings are concerns and will need to be adjusted. The rest should work well.
custom Gcode start:
M109 S[first_layer_temperature_0];set extruder temp and start heating
G28 X0 Y0 Z0;home X and Y and Z
G29 ;probe bed
G90; set absolute coordinates
G92 E0; reset extruder distance
G1 Z3 F3000; get out of the bed after probe
G1 X10 Y10 F3000 ; move to back right corner
custom Gcode end:
M104 S0 ; turn off temperature
G28 X0 ; home X axis
M84 ; disable motors
Screenshots: