Shiva Hot-End/es
Release status: Experimental
Description | Hot-End
|
License | |
Author | |
Contributors | |
Based-on | |
Categories | |
CAD Models | |
External Link |
Contents
English • العربية • български • català • čeština • Deutsch • Ελληνικά • español • فارسی • français • hrvatski • magyar • italiano • română • 日本語 • 한국어 • lietuvių • Nederlands • norsk • polski • português • русский • Türkçe • українська • 中文(中国大陆) • 中文(台灣) • עברית • azərbaycanca • |
Introduction
The Clone Wars project is a project started by people from the Carlos III University of Madrid (Spain) with the goal of promoting the making of RepRaps ("clones") around Spain. Over the time it has become the main hub for the Spanish community.
At this point this is highly experimental, so use at your own risk.
Dentro de este proyecto , tambien esta el de desarrollar hotends propios, de forma que no se dependa del exterior.
Shiva Hot-End v0.1
Inspirado en el Parcan v1, Prueba unica del nozzle y del aislante a traves de corcho natural. Sujeccion a traves
Comparativa Parcanv1 vs J-Head MK-IV
Shiva Hot-End v0.2
En esta versión se deja de un lado la orientación hacia el Parcan v1 para pasar al J-Head MK-V No se va a llevar a cabo la utilización de un ventilador de refrigeración, ya que se desea un hotend lo más sencillo posible. Esta versión se utiliza unicamente para comprobar el reflujo en la unión del aislante con el nozzle y la temperatura superior
Shiva Hot-End v0.3
Aumentamos la longitud total del hotends, asi como la del PTFE y cambiamos el tubo contenedor de la resistencia por un bloque.